The sample program aescrypt2 shows bad practice: hand-rolled CBC
implementation, CBC+HMAC for AEAD, hand-rolled iterated SHA-2 for key
stretching, no algorithm agility. The new sample program pbcrypt does
the same thing, but better. So remove aescrypt2.
Fix#1906
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
An incorrect error code addition was spotted by the new invasive testing
infrastructure whereby pk_get_pk_alg will always return a high level
error or zero and pk_parse_key_pkcs8_unencrypted_der will try to add
another high level error, resulting in a garbage error code.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Signed-off-by: Gilles Peskine <gilles.peskine@arm.com>
The baremetal configuration is, among other things, our default
reference point for code size measurements. So disable debugging
features that would not be enabled in production where code size is
limited. In particular, this shrinks the core SSL modules by about
half. Keep debugging features that are solely in their own
modules (MBEDTLS_ERROR_C, MBEDTLS_VERSION_FEATURES) since it's easy to
filter them out.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Make sure line number reported is correct for the overly long line, and
change the message to be more readable.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
As I descovered, a changelog entry with a line length greater than 80
characters would still pass CI. This is a quick change to the script to
make it detect these descrepancies and fail.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
In a TLS client, enforce the Diffie-Hellman minimum parameter size
set with mbedtls_ssl_conf_dhm_min_bitlen() precisely. Before, the
minimum size was rounded down to the nearest multiple of 8.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
An SSL client can be configured to insist on a minimum size for the
Diffie-Hellman (DHM) parameters sent by the server. Add several test
cases where the server sends parameters with exactly the minimum
size (must be accepted) or parameters that are one bit too short (must
be rejected). Make sure that there are test cases both where the
boundary is byte-aligned and where it isn't.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Write a simple unit test for mbedtls_ecp_muladd().
Add just one pair of test cases. One of them causes the argument to
fix_negative to have an argument with an all-bits-zero least
significant limb which briefly triggered a branch in Mbed TLS 2.26+.
See https://github.com/ARMmbed/mbedtls/issues/4296 and
https://github.com/ARMmbed/mbedtls/pull/4297.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Move the handling of the sign out of the base-specific loops. This
both simplifies the code, and corrects an edge case: the code in the
non-hexadecimal case depended on mbedtls_mpi_mul_int() preserving the
sign bit when multiplying a "negative zero" MPI by an integer, which
used to be the case but stopped with PR #2512.
Fix#4295. Thanks to Guido Vranken for analyzing the cause of the bug.
Credit to OSS-Fuzz.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
tests/suites/helpers.function and tests/suites/*_test.function contain
"#line" directives. This causes the TAGS file to contain references
pointing to the file path named in the "#line" directives, which is
relative to the "tests" directory rather than to the toplevel. Fix
this by telling etags to ignore "#line" directives, which is ok since
we aren't actually running it on any generated code.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
In a case exprssion, `|` separates patterns so it needs to be quoted.
Also `\` was not actually part of the set since it was quoting another
character.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
If `$FILTER` (`-f`) and `$EXCLUDE` (`-e`) are simple selections that
can be expressed as shell patterns, use a case statement instead of
calling grep to determine whether a test case should be executed.
Using a case statement significantly reduces the time it takes to
determine that a test case is excluded (but the improvement is small
compared to running the test).
This noticeably speeds up running a single test or a small number of
tests. Before:
```
tests/ssl-opt.sh -f Default 1.75s user 0.54s system 79% cpu 2.885 total
```
After:
```
tests/ssl-opt.sh -f Default 0.37s user 0.14s system 29% cpu 1.715 total
```
There is no perceptible difference when running a large number of tests.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Avoid using the external command grep for simple string-based checks.
Prefer a case statement. This improves performance.
The performance improvement is moderate but noticeable when skipping
most tests. When a test is run, the cost of the associated grep calls
is negligible. In this commit, I focused on the uses of grep that can
be easily replaced and that are executed a large number of times.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Multiplication is not constant flow on any CPU we are generally
targetting, so replace this with bit twiddling.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Marked dirty memory ends up in the result buffer after encoding (due to
the input having been marked dirty), and then the final comparison
to make sure that we got what we expected was triggering the constant
flow checker.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Fix a stack buffer overflow with mbedtls_net_poll() and
mbedtls_net_recv_timeout() when given a file descriptor that is beyond
FD_SETSIZE. The bug was due to not checking that the file descriptor
is within the range of an fd_set object.
Fix#4169
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Although the library documentation does not guarantee that calling
mbedtls_entropy_free() twice works, it's a plausible assumption and it's
natural to write code that frees an object twice. While this is uncommon for
an entropy context, which is usually a global variable, it came up in our
own unit tests (random_twice tests in test_suite_random in the
development branch).
Announce this in the same changelog entry as for RSA because it's the same
bug in the two modules.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
These tests validate that an entropy object can be reused and that
calling mbedtls_entropy_free() twice is ok.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
mbedtls_rsa_gen_key() was not freeing the RSA object, and specifically
not freeing the mutex, in some error cases.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
When MBEDTLS_THREADING_C is enabled, RSA code protects the use of the
key with a mutex. mbedtls_rsa_free() frees this mutex by calling
mbedtls_mutex_free(). This does not match the usage of
mbedtls_mutex_free(), which in general can only be done once.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
These tests are trivial except when compiling with MBEDTLS_THREADING_C
and a mutex implementation that are picky about matching each
mbedtls_mutex_init() with exactly one mbedtls_mutex_free().
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Signed-off-by: Chris Jones <christopher.jones@arm.com>
random(), and only this function, is thread-safe.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Signed-off-by: Chris Jones <christopher.jones@arm.com>
mbedtls_hmac_drbg_free() left a mutex in the initialized state. This
caused a resource leak on platforms where mbedtls_mutex_init()
allocates resources.
To fix this, mbedtls_hmac_drbg_free() no longer reinitializes the
mutex. To preserve the property that mbedtls_hmac_drbg_free() leaves
the object in an initialized state, which is generally true throughout
the library except regarding mutex objects on some platforms, no
longer initialize the mutex in mbedtls_hmac_drbg_init(). Since the
mutex is only used after seeding, and seeding is only permitted once,
call mbedtls_mutex_init() as part of the seeding process.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
random(), and only this function, is thread-safe.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Signed-off-by: Chris Jones <christopher.jones@arm.com>
mbedtls_ctr_drbg_free() left a mutex in the initialized state. This
caused a resource leak on platforms where mbedtls_mutex_init()
allocates resources.
To fix this, mbedtls_ctr_drbg_free() no longer reinitializes the
mutex. To preserve the property that mbedtls_ctr_drbg_free() leaves
the object in an initialized state, which is generally true throughout
the library except regarding mutex objects on some platforms, no
longer initialize the mutex in mbedtls_ctr_drbg_init(). Since the
mutex is only used after seeding, and seeding is only permitted once,
call mbedtls_mutex_init() as part of the seeding process.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Document the usage inside the library, and relate it with how it's
additionally used in the test code.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Subtract the number of calls to mbedtls_mutex_free() from the number
of calls to mbedtls_mutex_init(). A mutex leak will manifest as a
positive result at the end of the test case.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Signed-off-by: Chris Jones <christopher.jones@arm.com>
If the mutex usage verification framework is enabled and it detects a
mutex usage error, report this error and mark the test as failed.
This detects most usage errors, but not all cases of using
uninitialized memory (which is impossible in full generality) and not
leaks due to missing free (which will be handled in a subsequent commit).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Check that the source address and the frame counter have the expected
length. Otherwise, if the test data was invalid, the test code could
build nonsensical inputs, potentially overflowing the iv buffer.
The primary benefit of this change is that it also silences a warning
from compiling with `gcc-10 -O3` (observed with GCC 10.2.0 on
Linux/amd64). GCC unrolled the loops and complained about a buffer
overflow with warnings like:
```
suites/test_suite_ccm.function: In function 'test_mbedtls_ccm_star_auth_decrypt':
suites/test_suite_ccm.function:271:15: error: writing 1 byte into a region of size 0 [-Werror=stringop-overflow=]
271 | iv[i] = source_address->x[i];
| ~~~~~~^~~~~~~~~~~~~~~~~~~~~~
suites/test_suite_ccm.function:254:19: note: at offset [13, 14] to object 'iv' with size 13 declared here
254 | unsigned char iv[13];
```
Just using memcpy instead of loops bypasses this warnings. The added
checks are a bonus.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
When using pthread mutexes (MBEDTLS_THREADING_C and
MBEDTLS_THREADING_PTHREAD enabled), and when test hooks are
enabled (MBEDTLS_TEST_HOOKS), set up wrappers around the
mbedtls_mutex_xxx abstraction. In this commit, the wrapper functions
don't do anything yet.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Don't reference the architecture document. This is an LTS branch and
new invasive tests are only going to be introduced as (perhaps partial
or adapted) backports of invasive tests from development anyway.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
When this option is enabled, the product includes additional
interfaces that enable additional tests. This option should not be
enabled in production, but is included in the "full" build to enable
the extra tests.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
We care about the exit code of our server, for example if it's
reporting a memory leak after having otherwise executed correctly.
We don't care about the exit code of the servers we're using for
interoperability testing (openssl s_server, gnutls-serv). We assume
that they're working correctly anyway, and they return 1 (gnutls-serv)
or die by the signal handle the signal (openssl) when killed by a
signal.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This used to be the case a long time ago but was accidentally broken.
Fix <github:nogrep> #4103 for ssl-opt.sh.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
if MBEDTLS_MPI_MAX_SIZE is odd then RSA_PRV_DER_MAX_BYTES will be two less than expected, since the macros are lacking parentheses.
Signed-off-by: Daniel Otte <d.otte@wut.de>
Fix a buffer overflow in mbedtls_mpi_sub_abs() when calculating
|A| - |B| where |B| is larger than |A| and has more limbs (so the
function should return MBEDTLS_ERR_MPI_NEGATIVE_VALUE).
Fix#4042
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Add test cases for mbedtls_mpi_sub_abs() where the second operand has
more limbs than the first operand (which, if the extra limbs are not
all zero, implies that the function returns
MBEDTLS_ERR_MPI_NEGATIVE_VALUE).
This exposes a buffer overflow (reported in #4042).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
These implementations don't necessarily consume entropy the same way the
mbed TLS internal software implementation does, and the 'reference
handshake' test vectors can thus not be applied to an ALT implementation.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
In component_test_no_hmac_drbg, the fact that HMAC_DRBG is disabled
doesn't affect the SSL code, but the fact that deterministic ECDSA is
disabled does. So run some ECDSA-related SSL tests.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
mbedtls_rsa_private() could return the sum of two RSA error codes
instead of a valid error code in some rare circumstances:
* If rsa_prepare_blinding() returned MBEDTLS_ERR_RSA_RNG_FAILED
(indicating a misbehaving or misconfigured RNG).
* If the comparison with the public value failed (typically indicating
a glitch attack).
Make sure not to add two high-level error codes.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
In order to remove large buffers from the stack, the der data is written
into the same buffer that the pem is eventually written into, however
although the pem data is zero terminated, there is now data left in the
buffer after the zero termination, which can cause
mbedtls_x509_crt_parse to fail to parse the same buffer if passed back
in. Patches also applied to mbedtls_pk_write_pubkey_pem, and
mbedtls_pk_write_key_pem, which use similar methods of writing der data
to the same buffer, and tests modified to hopefully catch any future
regression on this.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
mbedtls_ctr_drbg_set_reseed_interval() and
mbedtls_hmac_drbg_set_reseed_interval() can now be called before
their seed functions and the reseed_interval value will persist.
Previously it would be overwritten with the default value.
*_drbg_reseed_interval is now set in init() and free().
mbedtls_ctr_drbg_free() and mbedtls_hmac_drbg_free() now
reset the drbg context to the state immediately after init().
Tests:
- Added test to check that DRBG reseeds when reseed_counter
reaches reseed_interval, if reseed_interval set before seed
and reseed_interval is less than MBEDTLS_*_DRBG_RESEED_INTERVAL.
Signed-off-by: gacquroff <gavina352@gmail.com>
Fixes an issue where configs that had `MBEDTLS_MPI_MAX_BITS` greater than 256
but smaller than the test that was running (792 bits) the test would fail
incorrectly.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Extra whitespace and a missing newline at end of file was causing an error with
`check_files.py`.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Move dependancy on `MBEDTLS_MPI_MAX_BITS` to apply to the specific test cases
which will break when `MBEDTLS_MPI_MAX_BITS` is too small. This re-enables
previous tests that were turned off accidentally.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Previously `mbedtls_mpi_exp_mod` was tested with values that were over
`MBEDTLS_MPI_MAX_SIZE` in size. This is useful to do as some paths are only
taken when the exponent is large enough however, on builds where
`MBEDTLS_MPI_MAX_SIZE` is under the size of these test values.
This fix turns off these tests when `MBEDTLS_MPI_MAX_SIZE` is too small to
safely test (notably this is the case in config-thread.h).
Signed-off-by: Chris Jones <christopher.jones@arm.com>
In two test cases, the exponentiation computation was not being fully tested
as when A_bytes (the base) == N_bytes (the modulus) -> A = N. When this is the
case A is reduced to 0 and therefore the result of the computation will always
be 0.
This fixes that issue and therefore increases the test coverage to ensure
different computations are actually being run.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Reword test cases to be easier to read and understand.
Adds comments to better explain what the test is doing.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Add two further boundary tests for cases where both the exponent and modulus to
`mbedtls_mpi_exp_mod()` are `MBEDTLS_MPI_MAX_SIZE`, or longer, bytes long.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Adds test cases to ensure that `mbedtls_mpi_exp_mod` will return an error with
an exponent or modulus that is greater than `MBEDTLS_MPI_MAX_SIZE` in size.
Adds test cases to ensure that Diffie-Hellman will fail to make a key pair
(using `mbedtls_dhm_make_public`) when the prime modulus is greater than
`MBEDTLS_MPI_MAX_SIZE` in size.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Add a test case to ensure `mbedtls_mpi_exp_mod` fails when using a key size
larger than MBEDTLS_MPI_MAX_SIZE.
Add a test case to ensure that Diffie-Hellman operations fail when using a key
size larger than MBEDTLS_MPI_MAX_SIZE.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Check that the exponent and modulus is below `MBEDTLS_MPI_MAX_BITS` before
performing a time expensive operation (modular exponentiation). This prevents
a potential DoS from Diffie-Hellman computations with extremely
large key sizes.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Add missing tag check for algorithm parameters when comparing the
signature in the description part of the cert against the actual
signature whilst loading a certificate. This was found by a
certificate (created by fuzzing) that openssl would not verify, but
mbedtls would.
Regression test added (one of the client certs modified accordingly)
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
"declaration-after-statement" was generated because that code was
backported from the development branch, which currently uses C99.
Signed-off-by: Rodrigo Dias Correa <rodrigo@correas.us>
`finish_sha384_t` was made more generic by using `unsigned char*`
instead of `unsigned char[48]` as the second parameter.
This change tries to make the function casting more robust against
future improvements of gcc analysis.
Signed-off-by: Rodrigo Dias Correa <rodrigo@correas.us>
This commit fixes the same warning fixed by baeedbf9, but without
wasting RAM. By casting `mbedtls_sha512_finish_ret()`, `padbuf`
could be kept 48 bytes long without triggering any warnings.
Signed-off-by: Rodrigo Dias Correa <rodrigo@correas.us>
GCC 11 generated a warning because `padbuf` was too small to be
used as an argument for `mbedtls_sha512_finish_ret`. The `output`
parameter of `mbedtls_sha512_finish_ret` has the type
`unsigned char[64]`, but `padbuf` was only 48 bytes long.
Even though `ssl_calc_finished_tls_sha384` uses only 48 bytes for
the hash output, the size of `padbuf` was increased to 64 bytes.
Signed-off-by: Rodrigo Dias Correa <rodrigo@correas.us>
GCC 11 generated the warnings because the parameter `ret_buf`
was declared as `const char[10]`, but some of the arguments
provided in `run_test_snprintf` are shorter literals, like "".
Now the type of `ret_buf` is `const char *`.
Both implementations of `test_snprintf` were fixed.
Signed-off-by: Rodrigo Dias Correa <rodrigo@correas.us>
In GCC 11, parameters declared as arrays in function prototypes
cannot be declared as pointers in the function definition. The
same is true for the other way around.
The definition of `mbedtls_aes_cmac_prf_128` was changed to match
its public prototype in `cmac.h`. The type `output` was
`unsigned char *`, now is `unsigned char [16]`.
In `ssl_tls.c`, all the `ssl_calc_verify_*` variants now use pointers
for the output `hash` parameter. The array parameters were removed
because those functions must be compatible with the function pointer
`calc_verify` (defined in `ssl_internal.h`).
Signed-off-by: Rodrigo Dias Correa <rodrigo@correas.us>
Positive tests: test that the RNG has the expected size, given that we
know how many leading zeros it has because we know how the function
consumes bytes and when the test RNG produces null bytes.
Negative tests: test that if the RNG is willing to emit less than the
number of wanted bytes, the function fails.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Complement to 0a8352b4: peer_pmslen is not initialized when decryption
fails, so '|= peer_pmslen' may access uninitialized memory, as indicated
by Frama-C/Eva.
Co-authored-by: Gilles Peskine <gilles.peskine@arm.com>
Signed-off-by: André Maroneze <maroneze@users.noreply.github.com>
Add a build with MBEDTLS_ERROR_STRERROR_DUMMY but not MBEDTLS_ERROR_C.
Previously, both options were enabled by default, but
MBEDTLS_ERROR_STRERROR_DUMMY only matters when MBEDTLS_ERROR_C is
enabled, so its effect was not tested.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Simplify the guards on MBEDTLS_ERROR_C and MBEDTLS_ERROR_STRERROR_DUMMY.
No longer include superfluous headers and definition: string.h and
platform.h are only needed for MBEDTLS_ERROR_C; time_t is not needed
at all.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This is fix for the MBEDTLS_AES_SETKEY_DEC_ALT macro switch is including the aes xts methods
and building with a custom mbedtls_aes_setkey_dec function will disable the aes xts methods.
The fix is separating the aes xts methods and the MBEDTLS_AES_SETKEY_DEC_ALT can only
switch the presence of the mbedtls_aes_setkey_dec function.
Signed-off-by: gabor-mezei-arm <gabor.mezei@arm.com>
CMake versions less than 3.0 do not support the `target_sources`
command. In order to be able to support v2.8.12.2 of cmake, add the
extra targets directly to the target command.
This is a backport from the development branch, except that the uses in
this branch are simpler, and modifying the SOURCES property directly is
not needed.
Fixes#3801
Signed-off-by: David Brown <david.brown@linaro.org>
Fix `printf "$foo"` which treats the value of `foo` as a printf format
rather than a string.
I used the following command to find potentially problematic lines:
```
git ls-files '*.sh' | xargs egrep 'printf +("?[^"]*|[^ ]*)\$'
```
The remaining ones are false positives for this regexp.
The errors only had minor consequences: the output of `ssl-opt.sh`
contained lines like
```
Renegotiation: gnutls server strict, client-initiated .................. ./tests/ssl-opt.sh: 741: printf: %S: invalid directive
PASS
```
and in case of failure the GnuTLS command containing a substring like
`--priority=NORMAL:%SAFE_RENEGOTIATION` was not included in the log
file. With the current tests, there was no risk of a test failure
going undetected.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Showing a regexp to say that by default all tests are executed is not
particularly helpful.
If we ever add a default exclusion list or a default filter, we can
edit the documentation again.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This way we can have a single call to mbedtls_platform_zeroize, which
saves a few bytes of code size.
Additionally, on my PC, I notice a significant speed improvement
(x86_64 build with MBEDTLS_AESNI_C disabled, gcc 5.4.0 -O3). I don't
have an explanation for that (I expected no measurable difference).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Remove the zeroization of a pointer variable in the AES block
functions. The code was valid but spurious and misleading since it
looked like a mistaken attempt to zeroize the pointed-to buffer.
Reported by Antonio de la Piedra, CEA Leti, France.
Note that we do not zeroize the buffer here because these are the
round keys, and they need to stay until all the blocks are processed.
They will be zeroized in mbedtls_aes_free().
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Set the CMake-observed variable `CTEST_OUTPUT_ON_FAILURE`, so that when
a "make test" run by CMake fails, verbose test output about the detail
of failure is available.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
From now on, external contributions are no longer acknowledged in the
changelog file. They of course remain acknowledged in the Git history.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Starting with commit 49e94e3, the do/while loop in
`rsa_prepare_blinding()` was changed to a `do...while(0)`, which
prevents retry from being effective and leaves dead code.
Restore the while condition to retry, and lift the calls to finish the
computation out of the while loop by by observing that they are
performed only when `mbedtls_mpi_inv_mod()` returns zero.
Signed-off-by: Peter Kolbus <peter.kolbus@garmin.com>
The toplevel directory is actually just ../..: the makefile commands
are executed in the subdirectory. $(PWD) earlier was wrong because it
comes from the shell, not from make. Looking up $(MAKEFILE_LIST) is
wrong because it indicates where the makefile is (make -f), not which
directory to work in (make -C).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This reduces the impact of the code size increase due to the addition
of calls to mbedtls_platform_zeroize.
Signed-off-by: gabor-mezei-arm <gabor.mezei@arm.com>
Zeroising of local buffers and variables which are used for calculations in
mbedtls_internal_md*_process() and mbedtls_internal_ripemd160_process()
functions to erase sensitive data from memory.
Checked all function for possible missing zeroisation in MD.
Signed-off-by: gabor-mezei-arm <gabor.mezei@arm.com>
Zeroising of local buffers and variables which are used for calculations in
mbedtls_pkcs5_pbkdf2_hmac() and mbedtls_internal_sha*_process() functions
to erase sensitive data from memory.
Checked all function for possible missing zeroisation in PKCS and SHA.
Signed-off-by: gabor-mezei-arm <gabor.mezei@arm.com>
Description referred to mbedtls_ssl_sent_t callback,
but the callback is named mbedtls_ssl_send_t.
Signed-off-by: Christopher Moynihan <christophm@gmail.com>
Probably the `W[2 << MBEDTLS_MPI_WINDOW_SIZE]` notation is based on a transcription of 2**MBEDTLS_MPI_WINDOW_SIZE.
Signed-off-by: Daniel Otte <d.otte@wut.de>
The test function mbedtls_mpi_lt_mpi_ct did not initialize ret in test
code. If there was a bug in library code whereby the library function
mbedtls_mpi_lt_mpi_ct() did not set ret when it should, we might have
missed it if ret happened to contain the expected value. So initialize
ret to a value that we never expect.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
If test_fail is called multiple times in the same test case, report
the location of the first failure, not the last one.
With this change, you no longer need to take care in tests that use
auxiliary functions not to fail in the main function if the auxiliary
function has failed.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
RFC5280 does not state that the `revocationDate` should be checked.
In addition, when no time source is available (i.e., when MBEDTLS_HAVE_TIME_DATE is not defined), `mbedtls_x509_time_is_past` always returns 0. This results in the CRL not being checked at all.
https://tools.ietf.org/html/rfc5280
Signed-off-by: Raoul Strackx <raoul.strackx@fortanix.com>
Currently the new component in all.sh fails because
mbedtls_ssl_cf_memcpy_offset() is not actually constant flow - this is on
purpose to be able to verify that the new test works.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
The tests are supposed to be failing now (in all.sh component
test_memsan_constant_flow), but they don't as apparently MemSan doesn't
complain when the src argument of memcpy() is uninitialized, see
https://github.com/google/sanitizers/issues/1296
The next commit will add an option to test constant flow with valgrind, which
will hopefully correctly flag the current non-constant-flow implementation.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
This paves the way for a constant-flow implementation of HMAC checking, by
making sure that the comparison happens at a constant address. The missing
step is obviously to copy the HMAC from the secret offset to this temporary
buffer with constant flow, which will be done in the next few commits.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
* mbedtls-2.16: (32 commits)
A different approach of signed-to-unsigned comparison
Fix bug in redirection of unit test outputs
Don't forget to free G, P, Q, ctr_drbg, and entropy
Backport e2k support to mbedtls-2.7
compat.sh: stop using allow_sha1
compat.sh: quit using SHA-1 certificates
compat.sh: enable CBC-SHA-2 suites for GnuTLS
Fix license header in pre-commit hook
Update copyright notices to use Linux Foundation guidance
Fix building on NetBSD 9.0
Remove obsolete buildbot reference in compat.sh
Fix misuse of printf in shell script
Fix added proxy command when IPv6 is used
Simplify test syntax
Fix logic error in setting client port
ssl-opt.sh: include test name in log files
ssl-opt.sh: remove old buildbot-specific condition
ssl-opt.sh: add proxy to all DTLS tests
Log change as bugfix
Add changelog entry
...
I might be wrong, but lcc's optimizer is curious about this,
and I am too: shouldn't we free allocated stuff correctly
before exiting `dh_genprime` in this certain point of code?
Signed-off-by: makise-homura <akemi_homura@kurisa.ch>
They are used to generate cert_md*.crt.
Regenerate cert_md5.crt which had previously been generated for a
different key.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
It wasn't working when invoking programs/x509/cert_write or
programs/x509/cert_req due to relying on the current directory rather
than the location of the makefile.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Discover hash algorithms automatically rather than hard-coding a list,
as was previously done in cert_write.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
For some reason, RIPEMD160, SHA224 and SHA384 were not supported.
This fixes the build recipes for tests/data_files/cert_sha224.crt and
tests/data_files/cert_sha384.crt .
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Replace server2.crt with server2-sha256.crt which, as the name implies, is
just the SHA-256 version of the same certificate.
Replace server1.crt with cert_sha256.crt which, as the name doesn't imply, is
associated with the same key and just have a slightly different Subject Name,
which doesn't matter in this instance.
The other certificates used in this script (server5.crt and server6.crt) are
already signed with SHA-256.
This change is motivated by the fact that recent versions of GnuTLS (or older
versions with the Debian patches) reject SHA-1 in certificates by default, as
they should. There are options to still accept it (%VERIFY_ALLOW_BROKEN and
%VERIFY_ALLOW_SIGN_WITH_SHA1) but:
- they're not available in all versions that reject SHA-1-signed certs;
- moving to SHA-2 just seems cleaner anyway.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Recent GnuTLS packages on Ubuntu 16.04 have them disabled.
From /usr/share/doc/libgnutls30/changelog.Debian.gz:
gnutls28 (3.4.10-4ubuntu1.5) xenial-security; urgency=medium
* SECURITY UPDATE: Lucky-13 issues
[...]
- debian/patches/CVE-2018-1084x-4.patch: hmac-sha384 and sha256
ciphersuites were removed from defaults in lib/gnutls_priority.c,
tests/priorities.c.
Since we do want to test the ciphersuites, explicitly re-enable them in the
server's priority string. (This is a no-op with versions of GnuTLS where those
are already enabled by default.)
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
As a result, the copyright of contributors other than Arm is now
acknowledged, and the years of publishing are no longer tracked in the
source files.
Also remove the now-redundant lines declaring that the files are part of
MbedTLS.
This commit was generated using the following script:
# ========================
#!/bin/sh
# Find files
find '(' -path './.git' -o -path './3rdparty' ')' -prune -o -type f -print | xargs sed -bi '
# Replace copyright attribution line
s/Copyright.*Arm.*/Copyright The Mbed TLS Contributors/I
# Remove redundant declaration and the preceding line
$!N
/This file is part of Mbed TLS/Id
P
D
'
# ========================
Signed-off-by: Bence Szépkúti <bence.szepkuti@arm.com>
For explicit proxy commands (included with `-p "$P_PXY <args>` in the test
case), it's the test's writer responsibility to handle IPv6; only fix the
proxy command when we're auto-adding it.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
This is a convenience for when we get log files from failed CI runs, or attach
them to bug reports, etc.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
A lot of DTLS test are timing-sensitive, especially those that contain
assertions about retransmission. Sometimes some DTLS test fails intermittently
on the CI with no clear apparent reason; we need more information in the log
to understand the cause of those failures.
Adding a proxy means we'll get timing information from the proxy logs.
An alternative would be to add timing information to the debug output of
ssl_server2 and ssl_client2. But that's more complex because getting
sub-second timing info is outside the scope of the C standard, and our current
timing module only provides a APi for sub-second intervals, not absolute time.
Using the proxy is easier as it's a single point that sees all messages, so
elapsed time is fine here, and it's already implemented in the proxy output.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
In the entries (mbedtls_x509_crl_entry values) on the list constructed
by mbedtls_x509_crl_parse_der(), set entry->raw.tag to
(SEQUENCE | CONSTRUCTED) rather than to the tag of the first ASN.1
element of the entry (which happens to be the tag of the serial
number, so INTEGER or INTEGER | CONTEXT_SPECIFIC). This is doesn't
really matter in practice (and in particular the value is never used
in Mbed TLS itself), and isn't documented, but at least it's
consistent with how mbedtls_x509_buf is normally used.
The primary importance of this change is that the old code tried to
access the tag of the first element of the entry even when the entry
happened to be empty. If the entry was empty and not followed by
anything else in the CRL, this could cause a read 1 byte after the end
of the buffer containing the CRL.
The test case "X509 CRL ASN1 (TBSCertList, single empty entry at end)"
hit the problematic buffer overflow, which is detected with ASan.
Credit to OSS-Fuzz for detecting the problem.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Add a few more negative test cases for mbedtls_x509_crl_parse.
The test data is manually adapted from the existing positive test case
"X509 CRL ASN1 (TBSCertList, sig present)" which decomposes as
305c
3047 tbsCertList TBSCertList
020100 version INTEGER OPTIONAL
300d signatureAlgorithm AlgorithmIdentifier
06092a864886f70d01010e
0500
300f issuer Name
310d300b0603550403130441424344
170c303930313031303030303030 thisUpdate Time
3014 revokedCertificates
3012 entry 1
8202abcd userCertificate CertificateSerialNumber
170c303831323331323335393539 revocationDate Time
300d signatureAlgorithm AlgorithmIdentifier
06092a864886f70d01010e
0500
03020001 signatureValue BIT STRING
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The usage of "!memcmp()" is at least not recommended
and better to use the macro dedicated for buffer
comparisons.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Do not hexify binary data to compare them, do compare
them directly. That simplifies the check code and save
memory.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Remove `hex` in name of variables of type data_t to reserve it
for variables of type char* that are the hexadecimal
representation of a data buffer.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Command to find the files in which lines have gone
larger than 79 characters due to the renaming:
grep '.\{80\}' \
`git diff-tree --no-commit-id --name-only -r HEAD` \
| grep hexcmp
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
This is an LTS branch, C99 isn't allowed yet, it breaks versions of MSVC that
we still support for this branch.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Currently this breaks all.sh component test_memsan_constant_flow, just as
expected, as the current implementation is not constant flow.
This will be fixed in the next commit.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
This option allows to test the constant-flow nature of selected code, using
MemSan and the fundamental observation behind ctgrind that the set of
operations allowed on undefined memory by dynamic analysers is the same as the
set of operations allowed on secret data to avoid leaking it to a local
attacker via side channels, namely, any operation except branching and
dereferencing.
(This isn't the full story, as on some CPUs some instructions have variable
execution depending on the inputs, most notably division and on some cores
multiplication. However, testing that no branch or memory access depends on
secret data is already a good start.)
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Just move code from ssl_decrypt_buf() to the new cf_hmac() function and then
call cf_hmac() from there.
This makes the new cf_hmac() function used and validates that its interface
works for using it in ssl_decrypt_buf().
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
The dummy implementation is not constant-flow at all for now, it's just
here as a starting point and a support for developing the tests and putting
the infrastructure in place.
Depending on the implementation strategy, there might be various corner cases
depending on where the lengths fall relative to block boundaries. So it seems
safer to just test all possible lengths in a given range than to use only a
few randomly-chosen values.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
The condition is a complex and repeated a few times. There were already some
inconsistencies in the repetitions as some of them forgot about DES.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
inv_mod() already returns a specific error code if the value is not
invertible, so no need to check in advance that it is. Also, this is a
preparation for blinding the call to inv_mod(), which is made easier by
avoiding the redundancy (otherwise the call to gcd() would need to be blinded
too).
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
In the next commit, we'll need to draw a second random value, in order to
blind modular inversion. Having a function for that will avoid repetition.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
fix_negative allocates memory for its result. The calling site didn't
check the return value, so an out-of-memory error could lead to an
incorrect calculation. Fix this.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Fix a memory leak in mbedtls_mpi_sub_abs when the output parameter is
aliased to the second operand (X = A - X) and the result is negative.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Run all the addition and subtraction tests with the result aliased to
the first operand and with the result aliased to the second operand.
Before, only some of the aliasing possibilities were tested, for only
some of the functions, with only some inputs.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Address remaining PR comments for #2118
- Add ChangeLog.d/x509write_csr_heap_alloc.txt.
- Fix parameter alignment per Gille's recommendation.
- Update comments to more explicitly describe the manipulation of buf.
- Replace use of `MBEDTLS_MPI_MAX_SIZE` as `sig` buffer size for
call to `x509write_csr_der_internal()` with more intuitive
`MBEDTLS_PK_SIGNATURE_MAX_SIZE`.
- Update `mbedtls_x509write_csr_der()` to return
`MBEDTLS_ERR_X509_ALLOC_FAILED` on mbedtls_calloc error.
Signed-off-by: Simon Leet <simon.leet@microsoft.com>
Using a stack-buffer with a size > 2K could easily produce a stack
overflow for an embedded device which has a limited stack size.
This commit dynamically allocates the large CSR buffer.
This commit avoids using a temporary buffer for storing the OIDs.
A single buffer is used:
a) OIDs are written backwards starting with the end of the buffer;
b) OIDs are memmove'd to the beginning of the buffer;
c) signature over this OIDs is computed and written backwards from the
end of the buffer;
d) the two memory regions are compacted.
Signed-off-by: Doru Gucea <doru-cristian.gucea@nxp.com>
This commit rewrites mbedtls_x509write_crt_pem() to not use
a statically size stack buffer to temporarily store the DER
encoded form of the certificate to be written.
This is not necessary because the DER-to-PEM conversion
accepts overlapping input and output buffers.
The CRT writing routine mbedtls_x509write_crt_der() prepares the TBS
(to-be-signed) part of the CRT in a temporary stack-allocated buffer,
copying it to the actual output buffer at the end of the routine.
This comes at the cost of a very large stack buffer. Moreover, its size
must be hardcoded to an upper bound for the lengths of all CRTs to be
written through the routine. So far, this upper bound was set to 2Kb, which
isn't sufficient some larger certificates, as was reported e.g. in #2631.
This commit fixes this by changing mbedtls_x509write_crt_der() to write
the certificate in-place in the output buffer, thereby avoiding the use
of a statically sized stack buffer for the TBS.
Fixes#2631.
In test functions calling mbedtls_test_unhexify(), change the
type of the associated parameters from `char*` to `data_t`.
That way the `unhexify` operation is done by the test
framework and not by the unit test code.
Use for the new parameters of type data_t the name of the
local variable that used to store the `unhexify` version of
the `char*` parameter.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
In preparation of changing the type of some parameters
of mbedtls_ccm_star_encrypt_and_tag/auth_decrypt from
`char *` to `data_t` to get rid of the calls to
mbedtls_test_unhexify():
- Change the name of parameters and local variables to
clarify which ones are related to the outputs of the
library functions under test and which ones are
related to the expected values of those outputs.
- Use two different buffers to store the plain and cipher
text as expected by the library functions.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
In preparation of changing the type of some parameters
of aes_encrypt_ofb() from `char *` to `data_t` to get rid
of the calls to mbedtls_test_unhexify():
- Change the name of parameters and local variables to
clarify which ones are related to the outputs of the
library functions under test and which ones are
related to the expected values of those outputs.
- Add assertion on fragment_size parameter
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
In preparation of changing the type of some parameters
of mbedtls_nist_kw_wrap/unwrap() from `char *` to `data_t`
to get rid of the calls to mbedtls_test_unhexify():
- Change the name of parameters and local variables to
clarify which ones are related to the outputs of the
library functions under test and which ones are
related to the expected values of those outputs.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
In preparation of changing the type of some parameters of
test_chacha20() from `char *` to `data_t` to get rid of the
calls to mbedtls_test_unhexify():
- Reduce the size of output[] buffer to 375 as its content
is "ASCII expended" into a buffer of 751 bytes.
- Align naming of variables to store and check the
output of mbedtls_chacha20_crypt(). No *dst* variables
anynore, only *output* variables.
- Use two different buffers to store the expected output
of mbedtls_chacha20_crypt() (expected_output_str[]) and
the ASCII string representation of the output of
mbedtls_chacha20_crypt() (output_string[]). Both were
stored in dst_str[] before.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
In preparation of changing the type of some parameters
of test_hkdf() from `char *` to `data_t` to get rid of the
calls to mbedtls_test_unhexify():
- Align naming of variables related to the expected okm
- Rename `okm_hex[]` to `okm_string[]`
- Added TEST_ASSERT( expected_okm_len <= sizeof( okm ) ) to check
that the okm[] buffer is large enough for the okm output.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
In preparation of changing the type of some parameters
of some test functions from `char *` to `data_t` to get
rid of the calls to mbedtls_test_unhexify():
- Align the name of source data length local variable
with the name of the local variable containing the
source data, respectively src_str and src_str_len.
- Change the type of length, index local variables
from int to size_t.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Command to find the files in which lines have gone
larger than 79 characters due to the renaming:
grep '.\{80\}' \
`git diff-tree --no-commit-id --name-only -r HEAD` \
| grep hexify
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
The path to source files were relative which triggered
warnings when generating the build system.
Move to absolute paths based on CMAKE_CURRENT_SOURCE_DIR.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Add the missing executable in the list of executables
to install.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Reorder declaration of executables in alphabetic order.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
While pure sh doesn't have a concept of local variables, we can partially
emulate them by unsetting variables before we exit the function, and use the
convention of giving them lowercase names to distinguish from global
variables.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
The list in the pre-push hook was redundant with the list of `check_*`
components in all.sh, and unsurprisingly it was outdated.
Missing components were:
- check_recursion
- check_changelog
- check_test_cases
- check_python_files
- check_generate_test_code
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
The primary purpose is to use it to run all.sh -k -q in the pre-push hook, but
this can be useful in any circumstance where you're not interested in the full
output from each component and just want a short summary of which components
were run (and if any failed).
Note that only stdout from components is suppressed, stderr is preserved so
that errors are reported. This means components should avoid printing to
stderr in normal usage (ie in the absence of errors).
Currently all the `check_*` components obey this convention except:
- check_generate_test_code: unittest prints progress to stderr
- check_test_cases: lots of non-fatal warnings printed to stderr
These components will be fixed in follow-up commits.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
- it's 2020, there shouldn't be too many systems out there where SHA-1 is the
only available hash option, so its usefulness is limited
- OTOH testing configurations without SHA-2 reveal bugs that are not easy to
fix in a fully compatible way
So overall, the benefit/cost ratio is not good enough to justify keeping SHA-1
as a fallback option here.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
This reverts commit 424210a93c.
This change was not safe enough for an LTS branch, as it might break code
that assumes it's safe to declare an object of type mbedtls_entropy_context
even when MBEDTLS_ENTROPY_C is undefined.
The build was failing in all.sh component test_no_drbg_no_sha2 because
entropy.h was referencing mbedtls_sha256_context but not including sha256.h
when SHA-256 and SHA-512 were both disabled. This broke query_config.c which
includes entropy.h (and actually all headers) unconditionally.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
The previous commit introduced a potential memory overread by reading
secret_len bytes from secret->p, while the is no guarantee that secret has
enough limbs for that.
Fix that by using an intermediate buffer and mpi_write_binary().
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
The dependency on a DRBG module was perhaps a bit strict for LTS branches, so
let's have an option that works with no DRBG when at least one SHA module is
present.
This changes the internal API of ecp_drbg_seed() by adding the size of the
MPI as a parameter. Re-computing the size from the number of limbs doesn't
work too well here as we're writing out to a fixed-size buffer and for some
curves (P-521) that would round up too much. Using mbedtls_mpi_get_len() is
not entirely satisfactory either as it would mean using a variable-length
encoding, with could open side channels.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Checking the budget only after the randomization is done means sometimes we
were randomizing first, then noticing we ran out of budget, return, come back
and randomize again before we finally normalize.
While this is fine from a correctness and security perspective, it's a minor
inefficiency, and can also be disconcerting while debugging, so we might as
well avoid it.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
It results in smaller code than using CTR_DRBG (64 bytes smaller on ARMv6-M
with arm-none-eabi-gcc 7.3.1), so let's use this by default when both are
available.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Unless MBEDTLS_ECP_NO_INTERNAL_RNG is defined, it's no longer possible for
f_rng to be NULL at the places that randomize coordinates.
Eliminate the NULL check in this case:
- it makes it clearer to reviewers that randomization always happens (unless
the user opted out at compile time)
- a NULL check in a place where it's easy to prove the value is never NULL
might upset or confuse static analyzers (including humans)
- removing the check saves a bit of code size
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Currently we draw pseudo-random numbers at the beginning and end of the main
loop. With ECP_RESTARTABLE, it's possible that between those two occasions we
returned from the multiplication function, hence lost our internal DRBG
context that lives in this function's stack frame. This would result in the
same pseudo-random numbers being used for blinding in multiple places. While
it's not immediately clear that this would give rise to an attack, it's also
absolutely not clear that it doesn't. So let's avoid that by using a DRBG
context that lives inside the restart context and persists across
return/resume cycles. That way the RESTARTABLE case uses exactly the
same pseudo-random numbers as the non-restartable case.
Testing and compile-time options:
- The case ECP_RESTARTABLE && !ECP_NO_INTERNAL_RNG is already tested by
component_test_no_use_psa_crypto_full_cmake_asan.
- The case ECP_RESTARTABLE && ECP_NO_INTERNAL_RNG didn't have a pre-existing
test so a component is added.
Testing and runtime options: when ECP_RESTARTABLE is enabled, the test suites
already contain cases where restart happens and cases where it doesn't
(because the operation is short enough or because restart is disabled (NULL
restart context)).
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
While it seems cleaner and more convenient to set it in the top-level
mbedtls_ecp_mul() function, the existence of the restartable option changes
things - when it's enabled the drbg context needs to be saved in the restart
context (more precisely in the restart_mul sub-context), which can only be
done when it's allocated, which is in the curve-specific mul function.
This commit only internal drbg management from mbedtls_ecp_mul() to
ecp_mul_mxz() and ecp_mul_comb(), without modifying behaviour (even internal),
and a future commit will modify the ecp_mul_comb() version to handle restart
properly.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
The case of MBEDTLS_ECP_RESTARTABLE isn't handled correctly yet: in that case
the DRBG instance should persist when resuming the operation. This will be
addressed in the next commit.
When both CTR_DRBG and HMAC_DRBG are available, CTR_DRBG is preferred since
both are suitable but CTR_DRBG tends to be faster and I needed a tie-breaker.
There are currently three possible cases to test:
- NO_INTERNAL_RNG is set -> tested in test_ecp_no_internal_rng
- it's unset and CTR_DRBG is available -> tested in the default config
- it's unset and CTR_DRBG is disabled -> tested in
test_ecp_internal_rng_no_ctr_drbg
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
No effect so far, except on dependency checking, as the feature it's meant to
disable isn't implemented yet (so the descriptions in config.h and the
ChangeLog entry are anticipation for now).
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
This will allow us to ship the LTS branches in a single archive
This commit was generated using the following script:
# ========================
#!/bin/sh
header1='\ * SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later\
*\
* This file is provided under the Apache License 2.0, or the\
* GNU General Public License v2.0 or later.\
*\
* **********\
* Apache License 2.0:\
*\
* Licensed under the Apache License, Version 2.0 (the "License"); you may\
* not use this file except in compliance with the License.\
* You may obtain a copy of the License at\
*\
* http://www.apache.org/licenses/LICENSE-2.0\
*\
* Unless required by applicable law or agreed to in writing, software\
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT\
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\
* See the License for the specific language governing permissions and\
* limitations under the License.\
*\
* **********\
*\
* **********\
* GNU General Public License v2.0 or later:\
*\
* This program is free software; you can redistribute it and/or modify\
* it under the terms of the GNU General Public License as published by\
* the Free Software Foundation; either version 2 of the License, or\
* (at your option) any later version.\
*\
* This program is distributed in the hope that it will be useful,\
* but WITHOUT ANY WARRANTY; without even the implied warranty of\
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\
* GNU General Public License for more details.\
*\
* You should have received a copy of the GNU General Public License along\
* with this program; if not, write to the Free Software Foundation, Inc.,\
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.\
*\
* **********'
find -path './.git' -prune -o '(' -name '*.c' -o -name '*.cpp' -o -name '*.fmt' -o -name '*.h' ')' -print | xargs sed -i "
# Normalize the first line of the copyright headers (no text on the first line of a block comment)
/^\/\*.*Copyright.*Arm/I s/\/\*/&\n */
# Insert new copyright header
/SPDX-License-Identifier/ i\
$header1
# Delete old copyright header
/SPDX-License-Identifier/,$ {
# Delete lines until the one preceding the mbedtls declaration
N
1,/This file is part of/ {
/This file is part of/! D
}
}
"
# Format copyright header for inclusion into scripts
header2=$(echo "$header1" | sed 's/^\\\? \* \?/#/')
find -path './.git' -prune -o '(' -name '*.gdb' -o -name '*.pl' -o -name '*.py' -o -name '*.sh' ')' -print | xargs sed -i "
# Insert new copyright header
/SPDX-License-Identifier/ i\
$header2
# Delete old copyright header
/SPDX-License-Identifier/,$ {
# Delete lines until the one preceding the mbedtls declaration
N
1,/This file is part of/ {
/This file is part of/! D
}
}
"
# ========================
Signed-off-by: Bence Szépkúti <bence.szepkuti@arm.com>
This commit was generated using the following script:
# ========================
#!/bin/sh
# Find scripts
find -path './.git' -prune -o '(' -name '*.gdb' -o -name '*.pl' -o -name '*.py' -o -name '*.sh' ')' -print | xargs sed -i '
# Remove Mbed TLS declaration if it occurs before the copyright line
1,/Copyright.*Arm/I {
/This file is part of/,$ {
/Copyright.*Arm/I! d
}
}
# Convert non-standard header in scripts/abi_check.py to the format used in the other scripts
/"""/,/"""/ {
# Cut copyright declaration
/Copyright.*Arm/I {
h
N
d
}
# Paste copyright declaration
/"""/ {
x
/./ {
s/^/# / # Add #
x # Replace orignal buffer with Copyright declaration
p # Print original buffer, insert newline
i\
s/.*// # Clear original buffer
}
x
}
}
/Copyright.*Arm/I {
# Print copyright declaration
p
# Read the two lines immediately following the copyright declaration
N
N
# Insert Apache header if it is missing
/SPDX/! {
i\
# SPDX-License-Identifier: Apache-2.0\
#\
# Licensed under the Apache License, Version 2.0 (the "License"); you may\
# not use this file except in compliance with the License.\
# You may obtain a copy of the License at\
#\
# http://www.apache.org/licenses/LICENSE-2.0\
#\
# Unless required by applicable law or agreed to in writing, software\
# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT\
# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\
# See the License for the specific language governing permissions and\
# limitations under the License.
# Insert Mbed TLS declaration if it is missing
/This file is part of/! i\
#\
# This file is part of Mbed TLS (https://tls.mbed.org)
}
# Clear copyright declaration from buffer
D
}
'
# ========================
Signed-off-by: Bence Szépkúti <bence.szepkuti@arm.com>
To find any files with a missing copyright declaration, use the following script:
# ========================
#!/bin/sh
# Find files with copyright declarations, and list their file extensions
exts=$(grep -Ril --exclude-dir .git 'Copyright.*Arm' | sed '
s/.*\./-name "*./
s/$/"/
' | sort -u | sed -n '
:l
N
$!bl
s/\n/ -o /gp
')
# Find files with file extensions that ususally include copyright extensions, but don't include a copyright declaration themselves.
eval "find -path './.git' -prune -o ! -path './tests/data_files/format_pkcs12.fmt' '(' $exts ')' -print" | xargs grep -Li 'Copyright.*Arm'
# ========================
Signed-off-by: Bence Szépkúti <bence.szepkuti@arm.com>
By convention, in the project, functions that have a
check or similar in the name return 0 if the check
succeeds, non-zero otherwise. Align with this for
mbedtls_ssl_chk_buf_ptr().
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
This commit adds an error condition for bad user configurations
and updates the number of SSL module errors in error.h.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
This commit uses the previously defined macro to uniformize
bounds checks in several places. It also adds bounds checks to
the ClientHello writing function that were previously missing.
Also, the functions adding extensions to the ClientHello message
can now fail if the buffer is too small or a different error
condition occurs, and moreover they take an additional buffer
end parameter to free them from the assumption that one is
writing to the default output buffer.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
This commit adds a macro for buffer bounds checks in the SSL
module. It takes the buffer's current and end position as the
first argument(s), followed by the needed space; if the
available space is too small, it returns an SSL_BUFFER_TOO_SMALL
error.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
The ssl_cli.c:ssl_write_supported_elliptic_curves_ext()
function is compiled only if MBEDTLS_ECDH_C, MBEDTLS_ECDSA_C
or MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED is defined which
implies that MBEDTLS_ECP_C is defined. Thus remove the
precompiler conditions on MBEDTLS_ECP_C in its code.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Instead, we insert a comment containing GDB_BREAK_HERE in the line we
want to break at, and let the gdb script search for it.
Signed-off-by: Bence Szépkúti <bence.szepkuti@arm.com>
This brings zeroize.c and test_zeroize.gdb in sync with development.
The include was introduced in 3b0c43063 (#2710).
Reverts ff8ae1115 from the same pull request.
Signed-off-by: Bence Szépkúti <bence.szepkuti@arm.com>
The function mbedtls_mpi_sub_abs first checked that A >= B and then
performed the subtraction, relying on the fact that A >= B to
guarantee that the carry propagation would stop, and not taking
advantage of the fact that the carry when subtracting two numbers can
only be 0 or 1. This made the carry propagation code a little hard to
follow.
Write an ad hoc loop for the carry propagation, checking the size of
the result. This makes termination obvious.
The initial check that A >= B is no longer needed, since the function
now checks that the carry propagation terminates, which is equivalent.
This is a slight performance gain.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
There was some confusion during review about when A->p[n] could be
nonzero. In fact, there is no need to set A->p[n]: only the
intermediate result d might need to extend to n+1 limbs, not the final
result A. So never access A->p[n]. Rework the explanation of the
calculation in a way that should be easier to follow.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The function mpi_sub_hlp had confusing semantics: although it took a
size parameter, it accessed the limb array d beyond this size, to
propagate the carry. This made the function difficult to understand
and analyze, with a potential buffer overflow if misused (not enough
room to propagate the carry).
Change the function so that it only performs the subtraction within
the specified number of limbs, and returns the carry.
Move the carry propagation out of mpi_sub_hlp and into its caller
mbedtls_mpi_sub_abs. This makes the code of subtraction very slightly
less neat, but not significantly different.
In the one other place where mpi_sub_hlp is used, namely mpi_montmul,
this is a net win because the carry is potentially sensitive data and
the function carefully arranges to not have to propagate it.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
mpi_sub_hlp performs a subtraction A - B, but took parameters in the
order (B, A). Swap the parameters so that they match the usual
mathematical syntax.
This has the additional benefit of putting the output parameter (A)
first, which is the normal convention in this module.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Let code analyzers know that this is deliberate. For example MSVC
warns about the conversion if it's implicit.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
In mpi_montmul, an auxiliary function for modular
exponentiation (mbedtls_mpi_mod_exp) that performs Montgomery
multiplication, the last step is a conditional subtraction to force
the result into the correct range. The current implementation uses a
branch and therefore may leak information about secret data to an
adversary who can observe what branch is taken through a side channel.
Avoid this potential leak by always doing the same subtraction and
doing a contant-trace conditional assignment to set the result.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Separate out a version of mpi_safe_cond_assign that works on
equal-sized limb arrays, without worrying about allocation sizes or
signs.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This reverts commit 2cc69fffcf.
A check was added in mpi_montmul because clang-analyzer warned about a
possibly null pointer. However this was a false positive. Recent
versions of clang-analyzer no longer emit a warning (3.6 does, 6
doesn't).
Incidentally, the size check was wrong: mpi_montmul needs
T->n >= 2 * (N->n + 1), not just T->n >= N->n + 1.
Given that this is an internal function which is only used from one
public function and in a tightly controlled way, remove both the null
check (which is of low value to begin with) and the size check (which
would be slightly more valuable, but was wrong anyway). This allows
the function not to need to return an error, which makes the source
code a little easier to read and makes the object code a little
smaller.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Similarly to the recently-added tests for dependencies on CTR_DRBG:
constrained environments will probably want only one DRBG module, and we
should make sure that tests pass in such a configuration.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Enable branch coverage output in basic_build_test.sh. This
includes enabling branch coverage output to the lcov make target,
which is disabled by default.
Signed-off-by: Dan Handley <dan.handley@arm.com>
People who prefer to rely on HMAC_DRBG (for example because they use it for
deterministic ECDSA and don't want a second DRBG for code size reasons) should
be able to build and run the tests suites without CTR_DRBG.
Ideally we should make sure the level of testing (SSL) is the same regardless
of which DRBG modules is enabled, but that's a more significant piece of work.
For now, just ensure everything builds and `make test` passes.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
While at it, declare deps on ENTROPY as well.
A non-regression test will be added in a follow-up commit.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Running the entropy unit test creates a suitable seedfile, but this
only works due to the happy accident that no prior unit test needs one
(specifically, test_suite_entropy runs before test_suite_rsa). So
create one explicitly, both for robustness and to keep the script
closer to the version in development where the explicit seedfile
creation is required.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Convert all text files to Unix line endings unless they're Windows
stuff.
Make sure that all text files have a trailing newline.
Remove whitespace at the end of lines.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
We're only interested in files that are committed and pushed to be
included in Mbed TLS, not in any other files that may be lying around.
So ask git for the list of file names.
This script is primarily intended to run on the CI, and there it runs
on a fresh Git checkout plus potentially some other checkouts or
leftovers from a previous part of the CI job. It should also run
reasonably well on developer machines, where there may be various
additional files. In both cases, git is available.
Ad hoc directory exclusions are no longer needed.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Have an explicit list of exemptions for specific checks rather than
whitelisting files to check. Some checks, such as permissions, should
apply to all files.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
When generate_errors.pl was first written, there was no asn1.h. But
now there is one and it does not need any special treatment.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Make the contributing document link to how to create a changelog rather
than just linking to the Changelog itself. Backport to 2.16
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Add output of python3 version to output_env.sh.
Added in addition to the version of `python` as some
project's scripts try both executable names.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
The link pointed to the website, this information is out of date, the
correct place to start discussions is the mailing list.
Signed-off-by: Janos Follath <janos.follath@arm.com>
The Cortex-A build is similar to Debian armel. The Cortex-M0+ is a
handy point of comparison for code size. Put that one last so that
it's easy to find in the log.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This is supposed to be for GCC (or a compiler with a compatible
command line interface) targeting arm-none-eabi, so name it
accordingly.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
build_deprecated combined the testing of deprecated features, and
testing of the build without deprecated features. Also, it violated the
component naming convention by being called build_xxx but running tests.
Replace it by:
* test_default_no_deprecated: check that you can remove deprecated
features from the default build.
* test_full_deprecated_warning: check that enabling DEPRECATED_WARNING
doesn't cause any warning from our own code.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
In the full config, don't set MBEDTLS_DEPRECATED_WARNING. This is debatable:
the full config does not enable deprecated features in this branch, so
MBEDTLS_DEPRECATED_WARNING is compatible with the other features.
Exclude it to keep LTS branches closer to development.
In any case, baremetal and full should have the same settings regarding
deprecated features, so don't do anything about DEPRECATED_xxx in baremetal.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Ensure that there is a build with -pedantic in the full config, not
just in "exotic" configurations.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Don't use string literals that are longer than 4095 bytes, which is
the minimum that C99 compilers are required to support. Compilers are
extremely likely to support longer literals, but `gcc -std=c99 -pedantic`
complains.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
<stdio.h> only declares the non-ISO-C function fileno() if an
appropriate POSIX symbol is defined or if using a compiler such as GCC
in non-pedantic mode. Define the appropriate POSIX symbol.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
It works in practice on almost every platform, given that we're only
using the wrong type in cases where the value is guaranteed to stay
within the value bits of a signed int. But even in this case it may or
may not be strictly conforming. Anyway `gcc -std=c99 -pedantic`
rejects it.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The intended logic around MBEDTLS_xxx_ALT is to exclude them from full
because they require the alternative implementation of one or more
library functions, except that MBEDTLS_PLATFORM_xxx_ALT are different:
they're alternative implementations of a platform function and they
have a built-in default, so they should be included in full. Document
this.
Fix a bug whereby MBEDTLS_PLATFORM_xxx_ALT didn't catch symbols where
xxx contains an underscore. As a consequence,
MBEDTLS_PLATFORM_GMTIME_R_ALT and MBEDTLS_PLATFORM_NV_SEED_ALT are now
enabled in the full config. Explicitly exclude
MBEDTLS_PLATFORM_SETUP_TEARDOWN_ALT because it behaves like the
non-platform ones, requiring an extra build-time dependency.
Explicitly exclude MBEDTLS_PLATFORM_NV_SEED_ALT from baremetal
because it requires MBEDTLS_ENTROPY_NV_SEED, and likewise explicitly
unset it from builds that unset MBEDTLS_ENTROPY_NV_SEED.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Remove the duplicated, and often out-of-date, list in the comments.
Instead explain in a comment, and have a single copy of the list which
is in the code.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Enable MBEDTLS_X509_ALLOW_EXTENSIONS_NON_V3 in the full config. There's
no reason to keep it out. We weren't testing it at all on the CI.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Only the Visual Studio 2017 toolset is currently preinstalled on Travis.
Use this, instead of our solution's default which is VS 2010.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Travis now offers a Windows environment. Do a build with Visual
Studio. This brings diversity into the Travis CI which otherwise only
uses GCC and Clang.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Keep it simple and mostly non-parametrizable for now.
A path to Visual Studio 2017 is hard-coded.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Just do the default build with Clang and run the unit tests. The
objective is to have one build on a Unix-like platform other than
Linux.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Add a baremetal build to Travis, to catch inadvertent dependencies on
platform functions.
The exact choice of target platform doesn't matter for this purpose.
Pick one that's present in all.sh, that uses a compiler that's
available in the Travis build environment (Ubuntu 16.04), and that
happens to be close to the Debian "armel" distribution.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Call all.sh to run all the available test_depends_* components. This
adds a run of depends-hashes.pl and depends-pkgalgs.pl.
Keep invoking test-ref-configs.pl rather than via all.sh so that it
doesn't run with ASan. This saves some time and ASan there doesn't
turn up much more than in the full config.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Some jobs don't actually test against GnuTLS, but all.sh checks its
presence in all test jobs, so it needs to be installed regardless.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
For the one long job with ASan, use the full configuration.
We get more coverage this way, at the cost of a slightly longer
runtime which we can afford since the "enumerated configurations" job
is slower.
Add a default-configuration build to the "basic checks" job. This job
is fairly quick (no ASan, no SSL testing).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This way anything we change in all.sh, such as adding tests for
programs/*/*, will be reflected here.
The build now uses GCC instead of Clang, which doesn't make much
difference in practice. The build now enables ASan and UBSan.
The tests now run compat.sh and ssl-opt.sh fully.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Different releases have different sets of sanity checks. Keep the list
in one place, namely all.sh.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Declare an explicit Python version. Pick 3.5 which is the default
version on Ubuntu 16.04. This is necessary on Travis to have a working
pip for Python 3.
Install Pylint 2.4.4. There's nothing special about this version, it's
just the latest version.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Split the build between:
* Basic checks
* A build in the default configuration with extensive tests
* Builds in other configurations with less testing
The intent is to have one shorter job with basic tests, and two longer
jobs that take roughly the same amount of time (split as evenly as
possible while keeping an easy-to-understand separation).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
In practice, we hardly ever get different outcomes, so there is no
gain in running tests with different compilers.
Experimentally, with the builds and tests we currently do and with the
compiler versions on a Travis Ubuntu 16.04, gcc jobs are significantly
faster than clang jobs (13 min vs 24 min). So use gcc.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Make it possible to use a compiler that isn't in $PATH, or that's
installed with a different name, or even a compiler for a different
target such as arm-linux-gnueabi.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Almost everything the selftest program does is in the test suites. But
just in case run the selftest program itself once in the full
configuration, and once in the default configuration with ASan, in
addition to running it out of box.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
"coverity_scan" branch is been removed as Travis shouldn't be
blocked from triggering it to run Coverity on it.
"development-psa" branch isn't used anymore and also it used to
depend on a private submodule which Travis would fail to get.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
When parsing a certificate with the basic constraints extension
the max_pathlen that was read from it was incremented regardless
of its value. However, if the max_pathlen is equal to INT_MAX (which
is highly unlikely), an undefined behaviour would occur.
This commit adds a check to ensure that such value is not accepted
as valid. Relevant tests for INT_MAX and INT_MAX-1 are also introduced.
Certificates added in this commit were generated using the
test_suite_x509write, function test_x509_crt_check. Input data taken
from the "Certificate write check Server1 SHA1" test case, so the generated
files are like the "server1.crt", but with the "is_ca" field set to 1 and
max_pathlen as described by the file name.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
Signed-off-by: Piotr Nowicki <piotr.nowicki@arm.com>
When building with MBEDTLS_MEMORY_DEBUG enabled, and running the ecdh part,
the benchmark program would start writing a very large number of space
characters on stdout, and would have to be killed because it never seemed to
terminate.
This was due to an integer overflow in computing how many space to leave after
the title in order to get memory measurements aligned, which resulted in up
to SIZE_MAX spaces being printed.
This commit just fixes the overflow, the next commit is going to fix the magic
number (12).
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
If we disable or enable a message locally, it's by design. There's no
need to clutter the Pylint output with this information.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
If we take the trouble of using pass, it's because we think the code
is clearer that way. For example, Pylint 2.4 rejects pass in
def foo():
"""Do nothing."""
pass
But relying on a docstring as the sole code is weird, hence the use of
pass.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Simplify the code in minor ways. Each of this changes fixes a warning
from Pylint 2.4 that doesn't appear with Pylint 1.7.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Python 2 is no longer supported upstream. Actively drop compatibility
with Python 2.
Removing the inheritance of a class on object pacifies recent versions
of Pylint (useless-object-inheritance).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Pylint warns about things like ``log.info('...'.format(...))``.
It insists on ``log.info('...', ...)``.
This is of minor utility (mainly a performance gain when there are
many messages that use formatting and are below the log level).
Some versions of Pylint (including 1.8, which is the version on
Ubuntu 18.04) only recognize old-style format strings using '%',
and complain about something like ``log.info('{}', foo)`` with
logging-too-many-args (Pylint supports new-style formatting if
declared globally with logging_format_style under [LOGGING] but
this requires Pylint >=2.2).
Disable this warning to remain compatible with Pylint 1.8 and not have
to change abi_check.py to use %-formats instead of {}-formats when
logging.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
check_python_files was optional in all.sh because we used to have CI
machines where pylint wasn't available. But this had the downside that
check_python_files kept breaking because it wasn't checked in the CI.
Now our CI has pylint and check_python_files should not be optional.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
On some systems, such as Ubuntu up to 19.04, `pylint` is for Python 2
and `pylint3` is for Python 3, so we should not use `pylint` even if
it's available.
Use the Python module instead of the trivial shell wrapper. This way
we can make sure to use the correct Python version.
Fix#3111
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Don't mix Windows and Unix line endings, it's the worst of both worlds.
Update the Visual Studio templates and regenerate the generated files.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Use CRLF consistently instead of cobbling a \r here and a \n there.
The generated files don't change.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Check Windows files for some issues, including permissions. Omit the
checks related to special characters (whitespace, line endings,
encoding) as appropriate.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
To test a file name exactly, prepend a / to the base name.
files_to_check actually checks suffixes, not file names, so rename it
to extensions_to_check.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The identifiers of the unmet dependencies of a test case are
stored in a buffer of fixed size that can be potentially too
small to store all the unmet dependencies. Indicate in test
reports if some unmet dependencies are missing.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Fix potential buffer overflow when tracking the unmet dependencies
of a test case. The identifiers of unmet dependencies are stored
in an array of fixed size. Ensure that we don't overrun the array.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Use size_t for some variables that are array indices.
Use unsigned for some variables that are counts of "small" things.
This is a backport of commit 3c1c8ea3e7.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Adding .function was necessary, as otherwise ctags would have no idea what to
do with those files.
Adding .h may not be necessary, as by default ctags considers them C++ which
is probably good enough, but since we're tuning the mapping anyway...
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
See the comments in the code for how an attack would go, and the ChangeLog
entry for an impact assessment. (For ECDSA, leaking a few bits of the scalar
over several signatures translates to full private key recovery using a
lattice attack.)
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
The current logging was sub-standard, in particular there was no trace
whatsoever of the HelloVerifyRequest being sent. Now it's being logged with
the usual levels: 4 for full content, 2 return of f_send, 1 decision about
sending it (or taking other branches in the same function) because that's the
same level as state changes in the handshake, and also same as the "possible
client reconnect" message" to which it's the logical continuation (what are we
doing about it?).
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Since unmet_dependencies only ever contains strings that are integers
written out in decimal, store the integer instead. Do this
unconditionally since it doesn't cost any extra memory.
This commit saves a little memory and more importantly avoids a gotcha
with uninitialized pointers which caused a bug on development (the
array was only initialized in verbose mode).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
There are currently 4 tests in ssl-opt.sh with either -C "resend" or -S
"resend", that is, asserting that no retransmission will occur. They sometimes
fail on loaded CI machines as one side doesn't send a message fast enough,
causing the other side to retransmit, causing the test to fail.
(For the "reconnect" test there was an other issue causing random failures,
fixed in a previous commit, but even after that fix the test would still
sometimes randomly fail, even if much more rarely.)
While it's a hard problem to fix in a general and perfect way, in practice the
probability of failures can be drastically reduced by making the timeout
values much larger.
For some tests, where retransmissions are actually expected, this would have
the negative effect of increasing the average running time of the test, as
each side would wait for longer before it starts retransmission, so we have a
trade-off between average running time and probability of spurious failures.
But for tests where retransmission is not expected, there is no such trade-off
as the expected running time of the test (assuming the code is correct most of
the time) is not impacted by the timeout value. So the only negative effect of
increasing the timeout value is on the worst-case running time on the test,
which is much less important, as test should only fail quite rarely.
This commit addresses the easy case of tests that don't expect retransmission
by increasing the value of their timeout range to 10s-20s. This value
corresponds to the value used for tests that assert `-S "autoreduction"` which
are in the same case and where the current value seems acceptable so far.
It also represents an increase, compared to the values before this commit, of
a factor 20 for the "reconnect" tests which were frequently observed to fail
in the CI, and of a factor 10 for the first two "DTLS proxy" tests, which were
observed to fail much less frequently, so hopefully the new values are enough
to reduce the probability of spurious failures to an acceptable level.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
The server must check client reachability (we chose to do that by checking a
cookie) before destroying the existing association (RFC 6347 section 4.2.8).
Let's make sure we do, by having a proxy-in-the-middle inject a ClientHello -
the server should notice, but not destroy the connection.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
In x509.c, the self-test code is dependent on MBEDTLS_CERTS_C and
MBEDTLS_SHA256_C being enabled. At some point in the recent past that dependency
was on MBEDTLS_SHA1_C but changed to SHA256, but the comment wasn't updated.
This commit updates the comment.
Signed-off-by: Simon Butcher <simon.butcher@arm.com>
Additional sanity checks in check_config.h to ensure:
* if test certificates are included (MBEDTLS_CERTS_C) there must be also be
support for the core X509 feature (MBEDTLS_X509_USE_C). This has a
secondary dependency on the public key abstraction layer (MBEDTLS_PK_C),
necessary as the certificates will either be signed by RSA or ECDSA, and
therefore need to be part of the library.
* if any of the TLS protocols are defined (MBEDTLS_SSL_PROTO_xxx) then a
key exchange method must also be defined (MBEDTLS_KEY_EXCHANGE_xxx).
Anyone who knows the library will probably not make these mistakes or will
quickly diagnose and fix them, but it is possible to compile and link both
configurations if you build only the library and not the example programs, and
therefore users may not realise immediately that there's a mistake, only
discovering it at runtime.
These checks may therefore save someone some time.
Signed-off-by: Simon Butcher <simon.butcher@arm.com>
- "Default" should only be used for tests that actually use the defaults (ie,
not passing options on the command line, except maybe debug/dtls)
- All tests in the "Encrypt then MAC" group should start with that string as a
common prefix
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Pylint when installed as a distro package can be installed as pylint3, whilst as
a PEP egg, it can be installed as pylint.
This commit changes the scripts to first use pylint if installed, and optionally
look for pylint3 if not installed. This is to allow a preference for the PEP
version over the distro version, assuming the PEP one is more likely to be
the correct one.
Signed-off-by: Simon Butcher <simon.butcher@arm.com>
`pylint3 --version` will output to stderr the status of the config file it's
using. This can be "No config file found" or "Using config file" or nothing.
This means the pylint version may or may not be on the first line.
Therefore this commit changes the filters on the pylint3 version output to first
strip out the config line, and then to select only the pylint line.
Signed-off-by: Simon Butcher <simon.butcher@arm.com>
Add the versions of Python, Perl, and Pylint to the version dump provided by
the output_env.sh script.
Signed-off-by: Simon Butcher <simon.butcher@arm.com>
A number of clean-up improvements following review.
* removal of redundant `` quotes
* removal of non-portable echo "\n", in favour of additional echo commands
* change to use of uname to detemine if the platform is Linux or not
* revised formatting of output
* change to dpkg-query from dpkg to find installed libasan variants
Co-Authored-By: Gilles Peskine <gilles.peskine@arm.com>
Signed-off-by: Simon Butcher <simon.butcher@arm.com>
This commit adds additional information to the output_env.sh script of:
* Linux distribution version (if available)
* GDB version (if available)
It also makes some information clearer:
* the type of OpenSSL/GNUTLS version (legacy/default/next)
* and whether certain versions are not installed, or not configured
And it simplifies the error messages for absent tools.
Signed-off-by: Simon Butcher <simon.butcher@arm.com>
The Mbed TLS project no longer requires a CLA. Contributions from now on
must be made under both Apache-2.0 AND GPL-2.0-or-later licenses, to enable
LTS (Long Term Support) branches of the software to continue to be provided
under either Apache-2.0 OR GPL-2.0-or-later. Contributors must accept the
terms of the Developer Certificate of Origin (DCO) by adding a Signed-off-by:
line to each commit message.
The software on the development branch continues to be provided under
Apache-2.0.
Update README.md, CONTRIBUTING.md and pull_request_template.md to explain
the new licensing model. Add a copy of the DCO to the project.
Signed-off-by: Dan Handley <dan.handley@arm.com>
The ssl-opt.sh test cases using session resumption tend to fail occasionally
on the CI due to a race condition in how ssl_server2 and ssl_client2 handle
the reconnection cycle.
The server does the following in order:
- S1 send application data
- S2 send a close_notify alert
- S3 close the client socket
- S4 wait for a "new connection" (actually a new datagram)
- S5 start a handshake
The client does the following in order:
- C1 wait for and read application data from the server
- C2 send a close_notify alert
- C3 close the server socket
- C4 reset session data and re-open a server socket
- C5 start a handshake
If the client has been able to send the close_notify (C2) and if has been
delivered to the server before if closes the client socket (S3), when the
server reaches S4, the datagram that we start the new connection will be the
ClientHello and everything will be fine.
However if S3 wins the race and happens before the close_notify is delivered,
in S4 the close_notify is what will be seen as the first datagram in a new
connection, and then in S5 this will rightfully be rejected as not being a
valid ClientHello and the server will close the connection (and go wait for
another one). The client will then fail to read from the socket and exit
non-zero and the ssl-opt.sh harness will correctly report this as a failure.
In order to avoid this race condition in test using ssl_client2 and
ssl_server2, this commits introduces a new command-line option
skip_close_notify to ssl_client2 and uses it in all ssl-opt.sh tests that use
session resumption with DTLS and ssl_server2.
This works because ssl_server2 knows how many messages it expects in each
direction and in what order, and closes the connection after that rather than
relying on close_notify (which is also why there was a race in the first
place).
Tests that use another server (in practice there are two of them, using
OpenSSL as a server) wouldn't work with skip_close_notify, as the server won't
close the connection until the client sends a close_notify, but for the same
reason they don't need it (there is no race between receiving close_notify and
closing as the former is the cause of the later).
An alternative approach would be to make ssl_server2 keep the connection open
until it receives a close_notify. Unfortunately it creates problems for tests
where we simulate a lossy network, as the close_notify could be lost (and the
client can't retransmit it). We could modify udp_proxy with an option to never
drop alert messages, but when TLS 1.3 comes that would no longer work as the
type of messages will be encrypted.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Some code paths want to access members of the mbedtls_rsa_context structure.
We can only do that when using our own implementation, as otherwise we don't
know anything about that structure.
(Only the top-level ones, ie, for each call to eg asn1_get_mpi(), ensure
there's at least one test case that makes this call fail in one way, but don't
test the various ways to make asn1_get_mpi fail - that should be covered
elsewhere.)
- the new checks added by the previous commits needed exercising
- existing tests sometimes had wrong descriptions or where passing for the
wrong reason (eg with the "length mismatch" test, the function actually
failed before reaching the length check)
- while at it, add tests for the rest as well
The valid minimal-size key was generated with:
openssl genrsa 128 2>/dev/null | openssl rsa -outform der 2>/dev/null | xxd -p
When parsing a PKCS#1 RSAPrivateKey structure, all parameters are always
present. After importing them, we need to call rsa_complete() for the sake of
alternative implementations. That function interprets zero as a signal for
"this parameter was not provided". As that's never the case, we mustn't pass
any zero value to that function, so we need to explicitly check for it.
This reverts commit 7550e857bf, reversing
changes made to d0c2575324.
stat() will never return S_IFLNK as the file type, as stat()
explicitly follows symlinks.
Fixes#3005.
Goals:
* Build with common compilers with common options, so that we don't
miss a (potentially useful) warning only triggered with certain
build options.
* A previous commit removed -O0 test jobs, leaving only the one with
-m32. We have inline assembly that is disabled with -O0, falling
back to generic C code. This commit restores a test that runs the
generic C code on a 64-bit platform.
If Y was constructed through functions in this module, then Y->n == 0
iff Y->p == NULL. However we do not prevent filling mpi structures
manually, and zero may be represented with n=0 and p a valid pointer.
Most of the code can cope with such a representation, but for the
source of mbedtls_mpi_copy, this would cause an integer underflow.
Changing the test for zero from Y->p==NULL to Y->n==0 causes this case
to work at no extra cost.
The splitting of this test into two versions depending on whether SHA-1 was
allowed by the server was a mistake in
5d2511c4d4 - the test has nothing to do with
SHA-1 in the first place, as the server doesn't request a certificate from
the client so it doesn't matter if the server accepts SHA-1 or not.
While the whole script makes (often implicit) assumptions about the version of
GnuTLS used, generally speaking it should work out of the box with the version
packaged on our reference testing platform, which is Ubuntu 16.04 so far.
With the update from Jan 8 2020 (3.4.10-4ubuntu1.6), the patches for rejecting
SHA-1 in certificate signatures were backported, so we should avoid presenting
SHA-1 signed certificates to a GnuTLS peer in ssl-opt.sh.
When mbedtls_x509_crt_parse_path() checks each object in the supplied path, it only processes regular files. This change makes it also accept a symlink to a file. Fixes#3005.
This was observed to be a problem on Fedora/CentOS/RHEL systems, where the ca-bundle in the default location is actually a symlink.
* origin/mbedtls-2.16:
Fix some pylint warnings
Enable more test cases without MBEDTLS_MEMORY_DEBUG
More accurate test case description
Clarify that the "FATAL" message is expected
Note that mbedtls_ctr_drbg_seed() must not be called twice
Fix CTR_DRBG benchmark
Changelog entry for xxx_drbg_set_entropy_len before xxx_drbg_seed
CTR_DRBG: support set_entropy_len() before seed()
CTR_DRBG: Don't use functions before they're defined
HMAC_DRBG: support set_entropy_len() before seed()
The functions mbedtls_ctr_drbg_random() and
mbedtls_ctr_drbg_random_with_add() could return 0 if an AES function
failed. This could only happen with alternative AES
implementations (the built-in implementation of the AES functions
involved never fail), typically due to a failure in a hardware
accelerator.
Bug reported and fix proposed by Johan Uppman Bruce and Christoffer
Lauri, Sectra.
None of the test cases in tests_suite_memory_buffer_alloc actually
need MBEDTLS_MEMORY_DEBUG. Some have additional checks when
MBEDTLS_MEMORY_DEBUG but all are useful even without it. So enable
them all and #ifdef out the parts that require DEBUG.
The test case "Memory buffer small buffer" emits a message
"FATAL: verification of first header failed". In this test case, it's
actually expected, but it looks weird to see this message from a
passing test. Add a comment that states this explicitly, and modify
the test description to indicate that the failure is expected, and
change the test function name to be more accurate.
Fix#309
In ssl_parse_hello_verify_request, we read 3 bytes (version and cookie
length) without checking that there are that many bytes left in
ssl->in_msg. This could potentially read from memory outside of the
ssl->receive buffer (which would be a remotely exploitable
crash).
In ssl_parse_hello_verify_request, we print cookie_len bytes without
checking that there are that many bytes left in ssl->in_msg. This
could potentially log data outside the received message (not a big
deal) and could potentially read from memory outside of the receive
buffer (which would be a remotely exploitable crash).
* restricted/pr/667: (24 commits)
Add ChangeLog entry
mpi_lt_mpi_ct: fix condition handling
mpi_lt_mpi_ct: Add further tests
mpi_lt_mpi_ct: Fix test numbering
mpi_lt_mpi_ct perform tests for both limb size
ct_lt_mpi_uint: cast the return value explicitely
mbedtls_mpi_lt_mpi_ct: add tests for 32 bit limbs
mbedtls_mpi_lt_mpi_ct: simplify condition
Rename variable for better readability
mbedtls_mpi_lt_mpi_ct: Improve documentation
Make mbedtls_mpi_lt_mpi_ct more portable
Bignum: Document assumptions about the sign field
Add more tests for mbedtls_mpi_lt_mpi_ct
mpi_lt_mpi_ct test: hardcode base 16
Document ct_lt_mpi_uint
mpi_lt_mpi_ct: make use of unsigned consistent
ct_lt_mpi_uint: make use of biL
Change mbedtls_mpi_cmp_mpi_ct to check less than
mbedtls_mpi_cmp_mpi_ct: remove multiplications
Remove excess vertical space
...
This issue has been reported by Tuba Yavuz, Farhaan Fowze, Ken (Yihang) Bai,
Grant Hernandez, and Kevin Butler (University of Florida) and
Dave Tian (Purdue University).
In AES encrypt and decrypt some variables were left on the stack. The value
of these variables can be used to recover the last round key. To follow best
practice and to limit the impact of buffer overread vulnerabilities (like
Heartbleed) we need to zeroize them before exiting the function.
The corner case tests were designed for 32 and 64 bit limbs
independently and performed only on the target platform. On the other
platform they are not corner cases anymore, but we can still exercise
them.
The corner case tests were designed for 64 bit limbs and failed on 32
bit platforms because the numbers in the test ended up being stored in a
different number of limbs and the function (correctly) returnd an error
upon receiving them.
In the case of *ret we might need to preserve a 0 value throughout the
loop and therefore we need an extra condition to protect it from being
overwritten.
The value of done is always 1 after *ret has been set and does not need
to be protected from overwriting. Therefore in this case the extra
condition can be removed.
The code relied on the assumptions that CHAR_BIT is 8 and that unsigned
does not have padding bits.
In the Bignum module we already assume that the sign of an MPI is either
-1 or 1. Using this, we eliminate the above mentioned dependency.
The signature of mbedtls_mpi_cmp_mpi_ct() meant to support using it in
place of mbedtls_mpi_cmp_mpi(). This meant full comparison functionality
and a signed result.
To make the function more universal and friendly to constant time
coding, we change the result type to unsigned. Theoretically, we could
encode the comparison result in an unsigned value, but it would be less
intuitive.
Therefore we won't be able to represent the result as unsigned anymore
and the functionality will be constrained to checking if the first
operand is less than the second. This is sufficient to support the
current use case and to check any relationship between MPIs.
The only drawback is that we need to call the function twice when
checking for equality, but this can be optimised later if an when it is
needed.
Multiplication is known to have measurable timing variations based on
the operands. For example it typically is much faster if one of the
operands is zero. Remove them from constant time code.
You can't reuse a CTR_DRBG context without free()ing it and
re-init()ing it. This generally happened to work, but was never
guaranteed. It could have failed with alternative implementations of
the AES module because mbedtls_ctr_drbg_seed() calls
mbedtls_aes_init() on a context which is already initialized if
mbedtls_ctr_drbg_seed() hasn't been called before, plausibly causing a
memory leak.
Calling free() and seed() with no intervening init fails when
MBEDTLS_THREADING_C is enabled and all-bits-zero is not a valid mutex
representation.
You can't reuse a CTR_DRBG context without free()ing it and
re-init()ing. This generally happened to work, but was never
guaranteed. It could have failed with alternative implementations of
the AES module because mbedtls_ctr_drbg_seed() calls
mbedtls_aes_init() on a context which is already initialized if
mbedtls_ctr_drbg_seed() hasn't been called before, plausibly causing a
memory leak. Calling free() and seed() with no intervening init fails
when MBEDTLS_THREADING_C is enabled and all-bits-zero is not a valid
mutex representation. So add the missing free() and init().
The blinding applied to the scalar before modular inversion is
inadequate. Bignum is not constant time/constant trace, side channel
attacks can retrieve the blinded value, factor it (it is smaller than
RSA keys and not guaranteed to have only large prime factors). Then the
key can be recovered by brute force.
Reducing the blinded value makes factoring useless because the adversary
can only recover pk*t+z*N instead of pk*t.
mbedtls_ctr_drbg_seed() always set the entropy length to the default,
so a call to mbedtls_ctr_drbg_set_entropy_len() before seed() had no
effect. Change this to the more intuitive behavior that
set_entropy_len() sets the entropy length and seed() respects that and
only uses the default entropy length if there was no call to
set_entropy_len().
The former test-only function mbedtls_ctr_drbg_seed_entropy_len() is
no longer used, but keep it for strict ABI compatibility.
Move the definitions of mbedtls_ctr_drbg_seed_entropy_len() and
mbedtls_ctr_drbg_seed() to after they are used. This makes the code
easier to read and to maintain.
mbedtls_hmac_drbg_seed() always set the entropy length to the default,
so a call to mbedtls_hmac_drbg_set_entropy_len() before seed() had no
effect. Change this to the more intuitive behavior that
set_entropy_len() sets the entropy length and seed() respects that and
only uses the default entropy length if there was no call to
set_entropy_len().
When running 'make test' with GNU make, if a test suite program
displays "PASSED", this was automatically counted as a pass. This
would in particular count as passing:
* A test suite with the substring "PASSED" in a test description.
* A test suite where all the test cases succeeded, but the final
cleanup failed, in particular if a sanitizer reported a memory leak.
Use the test executable's return status instead to determine whether
the test suite passed. It's always 0 on PASSED unless the executable's
cleanup code fails, and it's never 0 on any failure.
FixARMmbed/mbed-crypto#303
Some sanitizers default to displaying an error message and recovering.
This could result in a test being recorded as passing despite a
complaint from the sanitizer. Turn off sanitizer recovery to avoid
this risk.
* origin/pr/2860: (26 commits)
config.pl full: exclude MBEDTLS_CTR_DRBG_USE_128_BIT_KEY
mbedtls_hmac_drbg_set_entropy_len() only matters when reseeding
mbedtls_ctr_drbg_set_entropy_len() only matters when reseeding
mbedtls_ctr_drbg_seed: correct maximum for len
Add a note about CTR_DRBG security strength to config.h
Move MBEDTLS_CTR_DRBG_USE_128_BIT_KEY to the correct section
CTR_DRBG: more consistent formatting and wording
CTR_DRBG documentation: further wording improvements
CTR_DRBG: Improve the explanation of security strength
CTR_DRBG: make it easier to understand the security strength
HMAC_DRBG: note that the initial seeding grabs entropy for the nonce
Use standard terminology to describe the personalization string
Do note that xxx_drbg_random functions reseed with PR enabled
Consistently use \c NULL and \c 0
Also mention HMAC_DRBG in the changelog entry
HMAC_DRBG: improve the documentation of the entropy length
HMAC_DRBG documentation improvements clarifications
More CTR_DRBG documentation improvements and clarifications
Fix wording
Remove warning that the previous expanded discussion has obsoleted
...
The documentation of HMAC_DRBG erroneously claimed that
mbedtls_hmac_drbg_set_entropy_len() had an impact on the initial
seeding. This is in fact not the case: mbedtls_hmac_drbg_seed() forces
the entropy length to its chosen value. Fix the documentation.
The documentation of CTR_DRBG erroneously claimed that
mbedtls_ctr_drbg_set_entropy_len() had an impact on the initial
seeding. This is in fact not the case: mbedtls_ctr_drbg_seed() forces
the initial seeding to grab MBEDTLS_CTR_DRBG_ENTROPY_LEN bytes of
entropy. Fix the documentation and rewrite the discussion of the
entropy length and the security strength accordingly.
Explain how MBEDTLS_CTR_DRBG_ENTROPY_LEN is set next to the security
strength statement, rather than giving a partial explanation (current
setting only) in the documentation of MBEDTLS_CTR_DRBG_ENTROPY_LEN.
NIST and many other sources call it a "personalization string", and
certainly not "device-specific identifiers" which is actually somewhat
misleading since this is just one of many things that might go into a
personalization string.
Improve the formatting and writing of the documentation based on what
had been done for CTR_DRBG.
Document the maximum size and nullability of some buffer parameters.
Exercise the library functions with calloc returning NULL for a size
of 0. Make this a separate job with UBSan (and ASan) to detect
places where we try to dereference the result of calloc(0) or to do
things like
buf = calloc(size, 1);
if (buf == NULL && size != 0) return INSUFFICIENT_MEMORY;
memcpy(buf, source, size);
which has undefined behavior when buf is NULL at the memcpy call even
if size is 0.
This is needed because other test components jobs either use the system
malloc which returns non-NULL on Linux and FreeBSD, or the
memory_buffer_alloc malloc which returns NULL but does not give as
useful feedback with ASan (because the whole heap is a single C
object).
Add a very basic test of calloc to the selftest program. The selftest
program acts in its capacity as a platform compatibility checker rather
than in its capacity as a test of the library.
The main objective is to report whether calloc returns NULL for a size
of 0. Also observe whether a free/alloc sequence returns the address
that was just freed and whether a size overflow is properly detected.
This is a documentation-only change, but one that users who care about
NIST compliance may be interested in, to review if they're using the
module in a compliant way.
Document that a derivation function is used.
Document the security strength of the DRBG depending on the
compile-time configuration and how it is set up. In particular,
document how the nonce specified in SP 800-90A is set.
Mention how to link the ctr_drbg module with the entropy module.
* State explicit whether several numbers are in bits or bytes.
* Clarify whether buffer pointer parameters can be NULL.
* Explain the value of constants that are dependent on the configuration.
This is done to account for platforms, for which we want custom behavior
upon the program termination, hence we call `mbedtls_exit()` instead of
returning from `main()`.
For the sake of consistency, introduces the modifications have been made
to the test and utility examples as well. These, while less likely to be
used in the low level environments, won't suffer from such a change.
2019-08-16 09:14:32 +02:00
435 changed files with 18435 additions and 5740 deletions
- The submitter has [accepted the online agreement here with a click through](https://developer.mbed.org/contributor_agreement/)
or for companies or those that do not wish to create an mbed account, a slightly different agreement can be found [here](https://www.mbed.com/en/about-mbed/contributor-license-agreements/)
- The PR follows the [mbed TLS coding standards](https://tls.mbed.org/kb/development/mbedtls-coding-standards)
* Pull requests cannot be accepted until the PR follows the [contributing guidelines](../CONTRIBUTING.md). In particular, each commit must have at least one `Signed-off-by:` line from the committer to certify that the contribution is made under the terms of the [Developer Certificate of Origin](../dco.txt).
* This is just a template, so feel free to use/remove the unnecessary things
## Description
A few sentences describing the overall goals of the pull request's commits.
@ -5,11 +5,6 @@ We gratefully accept bug reports and contributions from the community. There are
- As with any open source project, contributions will be reviewed by the project team and community and may need some modifications to be accepted.
- The contribution should not break API or ABI, unless there is a real justification for that. If there is an API change, the contribution, if accepted, will be merged only when there will be a major release.
Contributor License Agreement (CLA)
-----------------------------------
- All contributions, whether large or small, require a Contributor's License Agreement (CLA) to be accepted. This is because source code can possibly fall under copyright law and we need your consent to share in the ownership of the copyright.
- To accept the Contributor’s License Agreement (CLA), individual contributors can do this by creating an Mbed account and [accepting the online agreement here with a click through](https://developer.mbed.org/contributor_agreement/). Alternatively, for contributions from corporations, or those that do not wish to create an Mbed account, a slightly different agreement can be found [here](https://www.mbed.com/en/about-mbed/contributor-license-agreements/). This agreement should be signed and returned to Arm as described in the instructions given.
Coding Standards
----------------
- We would ask that contributions conform to [our coding standards](https://tls.mbed.org/kb/development/mbedtls-coding-standards), and that contributions are fully tested before submission, as mentioned in the [Tests](#tests) and [Continuous Integration](#continuous-integration-tests) sections.
@ -19,12 +14,13 @@ Coding Standards
Making a Contribution
---------------------
1. [Check for open issues](https://github.com/ARMmbed/mbedtls/issues) or [start a discussion](https://tls.mbed.org/discussions) around a feature idea or a bug.
1. [Check for open issues](https://github.com/ARMmbed/mbedtls/issues) or [start a discussion](https://lists.trustedfirmware.org/mailman/listinfo/mbed-tls) around a feature idea or a bug.
1. Fork the [Mbed TLS repository on GitHub](https://github.com/ARMmbed/mbedtls) to start making your changes. As a general rule, you should use the ["development" branch](https://github.com/ARMmbed/mbedtls/tree/development) as a basis.
1. Write a test which shows that the bug was fixed or that the feature works as expected.
1. Send a pull request (PR) and work with us until it gets merged and published. Contributions may need some modifications, so a few rounds of review and fixing may be necessary. We will include your name in the ChangeLog :)
1. For quick merging, the contribution should be short, and concentrated on a single feature or topic. The larger the contribution is, the longer it would take to review it and merge it.
1. Mbed TLS is released under the Apache license, and as such, all the added files should include the Apache license header.
1. All new files should include the [Apache-2.0](https://spdx.org/licenses/Apache-2.0.html) standard license header where possible.
1. Ensure that each commit has at least one `Signed-off-by:` line from the committer. If anyone else contributes to the commit, they should also add their own `Signed-off-by:` line. By adding this line, contributor(s) certify that the contribution is made under the terms of the [Developer Certificate of Origin](dco.txt). The contribution licensing is described in the [License section of the README](README.md#License).
API/ABI Compatibility
---------------------
@ -47,17 +43,13 @@ Mbed TLS maintains several LTS (Long Term Support) branches, which are maintaine
When backporting to these branches please observe the following rules:
1. Any change to the library which changes the API or ABI cannot be backported.
2. All bug fixes that correct a defect that is also present in an LTS branch must be backported to that LTS branch. If a bug fix introduces a change to the API such as a new function, the fix should be reworked to avoid the API change. API changes without very strong justification are unlikely to be accepted.
3. If a contribution is a new feature or enhancement, no backporting is required. Exceptions to this may be additional test cases or quality improvements such as changes to build or test scripts.
1. All bug fixes that correct a defect that is also present in an LTS branch must be backported to that LTS branch. If a bug fix introduces a change to the API such as a new function, the fix should be reworked to avoid the API change. API changes without very strong justification are unlikely to be accepted.
1. If a contribution is a new feature or enhancement, no backporting is required. Exceptions to this may be additional test cases or quality improvements such as changes to build or test scripts.
It would be highly appreciated if contributions are backported to LTS branches in addition to the [development branch](https://github.com/ARMmbed/mbedtls/tree/development) by contributors.
Mbed TLS is a C library that implements cryptographic primitives, X.509 certificate manipulation and the SSL/TLS and DTLS protocols. Its small code footprint makes it suitable for embedded systems.
Configuration
-------------
@ -167,21 +169,12 @@ Mbed TLS can be ported to many different architectures, OS's and platforms. Befo
- [What external dependencies does Mbed TLS rely on?](https://tls.mbed.org/kb/development/what-external-dependencies-does-mbedtls-rely-on)
- [How do I configure Mbed TLS](https://tls.mbed.org/kb/compiling-and-building/how-do-i-configure-mbedtls)
License
-------
Unless specifically indicated otherwise in a file, Mbed TLS files are provided under the [Apache-2.0](https://spdx.org/licenses/Apache-2.0.html) OR [GPL-2.0-or-later](https://spdx.org/licenses/GPL-2.0-or-later.html) licenses. A copy of these licenses can be found in [apache-2.0.txt](./apache-2.0.txt) and [gpl-2.0.txt](./gpl-2.0.txt). Contributors must accept that their contributions are made under both the Apache-2.0 AND GPL-2.0-or-later licenses.
Contributing
------------
We gratefully accept bug reports and contributions from the community. There are some requirements we need to fulfill in order to be able to integrate contributions:
- All contributions, whether large or small require a Contributor's License Agreement (CLA) to be accepted. This is because source code can possibly fall under copyright law and we need your consent to share in the ownership of the copyright.
- We would ask that contributions conform to [our coding standards](https://tls.mbed.org/kb/development/mbedtls-coding-standards), and that contributions should be fully tested before submission.
- As with any open source project, contributions will be reviewed by the project team and community and may need some modifications to be accepted.
To accept the Contributor’s Licence Agreement (CLA), individual contributors can do this by creating an Mbed account and [accepting the online agreement here with a click through](https://os.mbed.com/contributor_agreement/). Alternatively, for contributions from corporations, or those that do not wish to create an Mbed account, a slightly different agreement can be found [here](https://www.mbed.com/en/about-mbed/contributor-license-agreements/). This agreement should be signed and returned to Arm as described in the instructions given.
### Making a Contribution
1. [Check for open issues](https://github.com/ARMmbed/mbedtls/issues) or [start a discussion](https://forums.mbed.com/c/mbed-tls) around a feature idea or a bug.
2. Fork the [Mbed TLS repository on GitHub](https://github.com/ARMmbed/mbedtls) to start making your changes. As a general rule, you should use the "development" branch as a basis.
3. Write a test which shows that the bug was fixed or that the feature works as expected.
4. Send a pull request and bug us until it gets merged and published. Contributions may need some modifications, so work with us to get your change accepted. We will include your name in the ChangeLog :)
We gratefully accept bug reports and contributions from the community. Please see the [contributing guidelines](CONTRIBUTING.md) for details on how to do this.
