eden-emu/mbedtls
15
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

Merge branch 'development' of ssh://github.com/ARMmbed/mbedtls into development

Browse source 
Conflicts:
	yotta/data/example-authcrypt/README.md
	yotta/data/example-benchmark/README.md
	yotta/data/example-hashing/README.md
	yotta/data/example-selftest/README.md
	yotta/data/example-tls-client/README.md
This commit is contained in:
Simon Butcher 2015-08-19 20:29:31 +01:00
commit a150050555
8 changed files with 94 additions and 136 deletions
Download patch file Download diff file Expand all files Collapse all files

19
yotta/data/example-hashing/README.md
View file

@ -28,28 +28,19 @@ To build and run this example the following requirements are necessary:
yotta target frdm-k64f-gcc
```
4. Check that there are no missing dependencies:
```
$ yotta ls
```
If there are missing dependencies, yotta will list them in the terminal. Please install these before proceeding.
5. Build mbedtls and the examples. This may take a long time if this is your first compilation:
4. Build mbedtls and the examples. This may take a long time if this is your first compilation:
```
$ yotta build
```
6. Copy `build/frdm-k64f-gcc/test/mbedtls-test-example-hashing.bin` to your mbed board and wait until the LED next to the USB port stops blinking.
5. Copy `build/frdm-k64f-gcc/test/mbedtls-test-example-hashing.bin` to your mbed board and wait until the LED next to the USB port stops blinking.
7. Start the serial terminal emulator and connect to the virtual serial port presented by FRDM-K64F. For settings, use 115200 baud, 8N1, no flow control. **Warning:** for this example, the baud rate is not the default 9600, it is 115200.
6. Start the serial terminal emulator and connect to the virtual serial port presented by FRDM-K64F. For settings, use 115200 baud, 8N1, no flow control. **Warning:** for this example, the baud rate is not the default 9600, it is 115200.
8. Press the reset button on the board.
7. Press the reset button on the board.
9. The output in the terminal window should look like:
8. The output in the terminal window should look like:
```
{{timeout;10}}