SDL/include/SDL3/SDL_asyncio.h

/*
  Simple DirectMedia Layer
  Copyright (C) 1997-2024 Sam Lantinga <slouken@libsdl.org>

  This software is provided 'as-is', without any express or implied
  warranty.  In no event will the authors be held liable for any damages
  arising from the use of this software.

  Permission is granted to anyone to use this software for any purpose,
  including commercial applications, and to alter it and redistribute it
  freely, subject to the following restrictions:

  1. The origin of this software must not be misrepresented; you must not
     claim that you wrote the original software. If you use this software
     in a product, an acknowledgment in the product documentation would be
     appreciated but is not required.
  2. Altered source versions must be plainly marked as such, and must not be
     misrepresented as being the original software.
  3. This notice may not be removed or altered from any source distribution.
*/

/* WIKI CATEGORY: AsyncIO */

/**
 * # CategoryAsyncIO
 *
 * SDL offers a way to perform I/O asynchronously. This allows an app to
 * read or write files without waiting for data to actually transfer; the
 * functions that request I/O never block while the request is fulfilled.
 *
 * Instead, the data moves in the background and the app can check for
 * results at their leisure.
 *
 * This is more complicated that just reading and writing files in a
 * synchronous way, but it can allow for more efficiency, and never having
 * framerate drops as the hard drive catches up, etc.
 *
 * The general usage pattern for async I/O is:
 *
 * - Create one or more SDL_AsyncIOQueue objects.
 * - Open files with SDL_AsyncIOFromFile.
 * - Start I/O tasks to the files with SDL_ReadAsyncIO or SDL_WriteAsyncIO,
 *   putting those tasks into one of the queues.
 * - Later on, use SDL_GetAsyncIOResult on a queue to see if any task
 *   is finished without blocking. Tasks might finish in any order with
 *   success or failure.
 * - When all your tasks are done, close the file with SDL_CloseAsyncIO.
 *   This also generates a task, since it might flush data to disk!
 *
 * This all works, without blocking, in a single thread, but one can also
 * wait on a queue in a background thread, sleeping until new results
 * have arrived:
 *
 * - Call SDL_WaitAsyncIOResult from one or more threads to efficiently block
 *   until new tasks complete.
 * - When shutting down, call SDL_SignalAsyncIOQueue to unblock any sleeping
 *   threads despite there being no new tasks completed.
 *
 * And, of course, to match the synchronous SDL_LoadFile, we offer
 * SDL_LoadFileAsync as a convenience function. This will handle allocating
 * a buffer, slurping in the file data, and null-terminating it; you still
 * get a task handle to check later.
 */

#ifndef SDL_asyncio_h_
#define SDL_asyncio_h_

#include <SDL3/SDL_stdinc.h>

#include <SDL3/SDL_begin_code.h>
/* Set up for C function definitions, even when using C++ */
#ifdef __cplusplus
extern "C" {
#endif

/**
 * The asynchronous I/O operation structure.
 *
 * This operates as an opaque handle. One can then request read or write
 * operations on it.
 *
 * \since This struct is available since SDL 3.0.0.
 *
 * \sa SDL_AsyncIOFromFile
 */
typedef struct SDL_AsyncIO SDL_AsyncIO;

/**
 * Types of asynchronous I/O tasks.
 *
 * \since This enum is available since SDL 3.0.0.
 */
typedef enum SDL_AsyncIOTaskType
{
    SDL_ASYNCIO_TASK_READ,   /**< A read operation. */
    SDL_ASYNCIO_TASK_WRITE,  /**< A write operation. */
    SDL_ASYNCIO_TASK_CLOSE   /**< A close operation. */
} SDL_AsyncIOTaskType;

/**
 * Possible outcomes of an asynchronous I/O task.
 *
 * \since This enum is available since SDL 3.0.0.
 */
typedef enum SDL_AsyncIOResult
{
    SDL_ASYNCIO_COMPLETE,  /**< request was completed without error */
    SDL_ASYNCIO_FAILURE,   /**< request failed for some reason; check SDL_GetError()! */
    SDL_ASYNCIO_CANCELLED  /**< request was cancelled before completing. */
} SDL_AsyncIOResult;

/**
 * Information about a completed asynchronous I/O request.
 *
 * \since This struct is available since SDL 3.0.0.
 */
typedef struct SDL_AsyncIOOutcome
{
    SDL_AsyncIO *asyncio;   /**< what generated this task. This pointer will be invalid if it was closed! */
    SDL_AsyncIOTaskType type;  /**< What sort of task was this? Read, write, etc? */
    SDL_AsyncIOResult result;  /**< the result of the work (success, failure, cancellation). */
    void *buffer;  /**< buffer where data was read/written. */
    Uint64 offset;  /**< offset in the SDL_AsyncIO where data was read/written. */
    Uint64 bytes_requested;  /**< number of bytes the task was to read/write. */
    Uint64 bytes_transferred;  /**< actual number of bytes that were read/written. */
    void *userdata;    /**< pointer provided by the app when starting the task */
} SDL_AsyncIOOutcome;

/**
 * An opaque handle for asynchronous I/O tasks.
 *
 * Each asynchronous read or write operation generates a task, which will
 * complete at some time in the future. This handle is used to track the
 * progress of that task.
 *
 * Tasks are added to an SDL_AsyncIOQueue, where they can be queried for
 * completion later.
 *
 * \since This struct is available since SDL 3.0.0.
 *
 * \sa SDL_ReadAsyncIO
 * \sa SDL_WriteAsyncIO
 */
typedef struct SDL_AsyncIOTask SDL_AsyncIOTask;

/**
 * A queue of completed asynchronous I/O tasks.
 *
 * When starting an asynchronous operation, you specify a queue for the new
 * task. A queue can be asked later if any tasks in it have completed,
 * allowing an app to manage multiple pending tasks in one place, in
 * whatever order they complete.
 *
 * \since This struct is available since SDL 3.0.0.
 *
 * \sa SDL_CreateAsyncIOQueue
 * \sa SDL_ReadAsyncIO
 * \sa SDL_WriteAsyncIO
 * \sa SDL_GetAsyncIOResult
 * \sa SDL_WaitAsyncIOResult
 */
typedef struct SDL_AsyncIOQueue SDL_AsyncIOQueue;

/**
 * Use this function to create a new SDL_AsyncIO object for reading from
 * and/or writing to a named file.
 *
 * The `mode` string understands the following values:
 *
 * - "r": Open a file for reading only. It must exist.
 * - "w": Open a file for writing only. It will create missing files or truncate existing ones.
 * - "r+": Open a file for update both reading and writing. The file must
 *   exist.
 * - "w+": Create an empty file for both reading and writing. If a file with
 *   the same name already exists its content is erased and the file is
 *   treated as a new empty file.
 *
 * There is no "b" mode, as there is only "binary" style I/O, and no "a" mode
 * for appending, since you specify the position when starting a task.
 *
 * This function supports Unicode filenames, but they must be encoded in UTF-8
 * format, regardless of the underlying operating system.
 *
 * This call is _not_ asynchronous; it will open the file before returning,
 * under the assumption that doing so is generally a fast operation. Future
 * reads and writes to the opened file will be async, however.
 *
 * \param file a UTF-8 string representing the filename to open.
 * \param mode an ASCII string representing the mode to be used for opening
 *             the file.
 * \returns a pointer to the SDL_AsyncIO structure that is created or NULL on
 *          failure; call SDL_GetError() for more information.
 *
 * \since This function is available since SDL 3.0.0.
 *
 * \sa SDL_CloseAsyncIO
 * \sa SDL_ReadAsyncIO
 * \sa SDL_WriteAsyncIO
 */
extern SDL_DECLSPEC SDL_AsyncIO * SDLCALL SDL_AsyncIOFromFile(const char *file, const char *mode);

/**
 * Use this function to get the size of the data stream in an SDL_AsyncIO.
 *
 * This call is _not_ asynchronous; it assumes that obtaining this info
 * is a non-blocking operation in most reasonable cases.
 *
 * \param asyncio the SDL_AsyncIO to get the size of the data stream from.
 * \returns the size of the data stream in the SDL_IOStream on success or a
 *          negative error code on failure; call SDL_GetError() for more
 *          information.
 *
 * \threadsafety It is safe to call this function from any thread.
 *
 * \since This function is available since SDL 3.0.0.
 */
extern SDL_DECLSPEC Sint64 SDLCALL SDL_GetAsyncIOSize(SDL_AsyncIO *asyncio);

/**
 * Start an async read.
 *
 * This function reads up to `size` bytes from `offset` position in the data
 * source to the area pointed at by `ptr`. This function may read less bytes
 * than requested.
 *
 * This function returns as quickly as possible; it does not wait for the
 * read to complete. On a successful return, this work will continue in the
 * background. If the work begins, even failure is asynchronous: a failing
 * return value from this function only means the work couldn't start at all.
 *
 * `ptr` must remain available until the work is done, and may be accessed by
 * the system at any time until then. Do not allocate it on the stack, as this
 * might take longer than the life of the calling function to complete!
 *
 * An SDL_AsyncIOQueue must be specified. The newly-created SDL_AsyncIOTask
 * will be added to it when it completes its work.
 *
 * \param asyncio a pointer to an SDL_AsyncIO structure.
 * \param ptr a pointer to a buffer to read data into.
 * \param offset the position to start reading in the data source.
 * \param size the number of bytes to read from the data source.
 * \param queue a queue to add the new SDL_AsyncIO to.
 * \param userdata an app-defined pointer that will be provided with the task results.
 * \returns A new task handle if a task was started, NULL on complete failure;
 *          call SDL_GetError() for more information.
 *
 * \threadsafety It is safe to call this function from any thread.
 *
 * \since This function is available since SDL 3.0.0.
 *
 * \sa SDL_WriteAsyncIO
 * \sa SDL_CreateAsyncIOQueue
 * \sa SDL_GetAsyncIOTaskResult
 */
extern SDL_DECLSPEC SDL_AsyncIOTask * SDLCALL SDL_ReadAsyncIO(SDL_AsyncIO *asyncio, void *ptr, Uint64 offset, Uint64 size, SDL_AsyncIOQueue *queue, void *userdata);

/**
 * Start an async write.
 *
 * This function writes `size` bytes from `offset` position in the data
 * source to the area pointed at by `ptr`.
 *
 * This function returns as quickly as possible; it does not wait for the
 * write to complete. On a successful return, this work will continue in the
 * background. If the work begins, even failure is asynchronous: a failing
 * return value from this function only means the work couldn't start at all.
 *
 * `ptr` must remain available until the work is done, and may be accessed by
 * the system at any time until then. Do not allocate it on the stack, as this
 * might take longer than the life of the calling function to complete!
 *
 * An SDL_AsyncIOQueue must be specified. The newly-created SDL_AsyncIOTask
 * will be added to it when it completes its work.
 *
 * \param asyncio a pointer to an SDL_AsyncIO structure.
 * \param ptr a pointer to a buffer to write data from.
 * \param offset the position to start writing to the data source.
 * \param size the number of bytes to write to the data source.
 * \param queue a queue to add the new SDL_AsyncIO to.
 * \param userdata an app-defined pointer that will be provided with the task results.
 * \returns A new task handle if a task was started, NULL on complete failure;
 *          call SDL_GetError() for more information.
 *
 * \threadsafety It is safe to call this function from any thread.
 *
 * \since This function is available since SDL 3.0.0.
 *
 * \sa SDL_ReadAsyncIO
 * \sa SDL_CreateAsyncIOQueue
 * \sa SDL_GetAsyncIOTaskResult

 */
extern SDL_DECLSPEC SDL_AsyncIOTask * SDLCALL SDL_WriteAsyncIO(SDL_AsyncIO *asyncio, void *ptr, Uint64 offset, Uint64 size, SDL_AsyncIOQueue *queue, void *userdata);

/**
 * Close and free any allocated resources for an async I/O object.
 *
 * Closing a file is _also_ an asynchronous task! If a write failure
 * were to happen during the closing process, for example, the
 * task results will report it as usual.
 *
 * This function guarantees that the close will happen after any other
 * pending tasks to `asyncio`, so it's safe to open a file, start
 * several operations, close the file immediately, then check for all
 * results later. This function will not block until the tasks have
 * completed.
 *
 * Once this function returns non-NULL, `asyncio` is no longer valid,
 * regardless of any future outcomes. Any completed tasks might still
 * contain this pointer in their SDL_AsyncIOOutcome data, in case the
 * app was using this value to track information, but it should not
 * be used again.
 *
 * If this function returns NULL, the close wasn't started at all, and
 * it's safe to attempt to close again later.
 *
 * \param asyncio a pointer to an SDL_AsyncIO structure to close.
 * \param queue a queue to add the new SDL_AsyncIO to.
 * \param userdata an app-defined pointer that will be provided with the task results.
 * \returns A new task handle if a task was started, NULL on complete failure;
 *          call SDL_GetError() for more information.
 *
 * \threadsafety It is safe to call this function from any thread, but
 *               two threads should not attempt to close the same object.
 *
 * \since This function is available since SDL 3.0.0.
 */
extern SDL_DECLSPEC SDL_AsyncIOTask * SDLCALL SDL_CloseAsyncIO(SDL_AsyncIO *asyncio, SDL_AsyncIOQueue *queue, void *userdata);

/**
 * Create a task queue for tracking multiple I/O operations.
 *
 * Async I/O operations are assigned to a queue when started. The
 * queue can be checked for completed tasks thereafter.
 *
 * \returns a new task queue object or NULL if there was an error; call
 *          SDL_GetError() for more information.
 *
 * \threadsafety It is safe to call this function from any thread.
 *
 * \since This function is available since SDL 3.0.0.
 *
 * \sa SDL_DestroyAsyncIOQueue
 * \sa SDL_GetAsyncIOResult
 * \sa SDL_WaitAsyncIOResult
 */
extern SDL_DECLSPEC SDL_AsyncIOQueue * SDLCALL SDL_CreateAsyncIOQueue(void);

/**
 * Destroy a previously-created async I/O task queue.
 *
 * If there are still tasks pending for this queue, this call will block until
 * those tasks are finished. All those tasks will be deallocated. Their results
 * will be lost to the app.
 *
 * Any pending reads from SDL_LoadFileAsync() that are still in this queue
 * will have their buffers deallocated by this function, to prevent a memory
 * leak.
 *
 * Once this function is called, the queue is no longer valid and should not
 * be used, including by other threads that might access it while destruction
 * is blocking on pending tasks.
 *
 * Do not destroy a queue that still has threads waiting on it through
 * SDL_WaitAsyncIOResult(). You can call SDL_SignalAsyncIOQueue() first to
 * unblock those threads, and take measures (such as SDL_WaitThread()) to make sure
 * they have finished their wait and won't wait on the queue again.
 *
 * \param queue the task queue to destroy.
 *
 * \threadsafety It is safe to call this function from any thread, so long as
 *               no other thread is waiting on the queue with SDL_WaitAsyncIOResult.
 *
 * \since This function is available since SDL 3.0.0.
 */
extern SDL_DECLSPEC void SDLCALL SDL_DestroyAsyncIOQueue(SDL_AsyncIOQueue *queue);

/**
 * Query an async I/O task queue for completed tasks.
 *
 * If a task assigned to this queue has finished, this will return true and fill in
 * `outcome` with the details of the task. If no task in the queue has finished,
 * this function will return false. This function does not block.
 *
 * If a task has completed, this function will free its resources and the task
 * pointer will no longer be valid. The task will be removed from the queue.
 *
 * It is safe for multiple threads to call this function on the same queue at
 * once; a completed task will only go to one of the threads.
 *
 * \param queue the async I/O task queue to query.
 * \param outcome details of a finished task will be written here. May not be NULL.
 * \returns true if task has completed, false otherwise.
 *
 * \threadsafety It is safe to call this function from any thread.
 *
 * \since This function is available since SDL 3.0.0.
 *
 * \sa SDL_WaitAsyncIOResult
 */
extern SDL_DECLSPEC bool SDLCALL SDL_GetAsyncIOResult(SDL_AsyncIOQueue *queue, SDL_AsyncIOOutcome *outcome);

/**
 * Block until an async I/O task queue has a completed task.
 *
 * This function puts the calling thread to sleep until there a task assigned to
 * the queue that has finished.
 *
 * If a task assigned to the queue has finished, this will return true and
 * fill in `outcome` with the details of the task. If no task in the queue has
 * finished, this function will return false.
 *
 * If a task has completed, this function will free its resources and the task
 * pointer will no longer be valid. The task will be removed from the queue.
 *
 * It is safe for multiple threads to call this function on the same queue at
 * once; a completed task will only go to one of the threads.
 *
 * Note that by the nature of various platforms, more than one waiting
 * thread may wake to handle a single task, but only one will obtain it,
 * so `timeoutMS` is a _maximum_ wait time, and this function may return
 * false sooner.
 *
 * This function may return false if there was a system error, the OS
 * inadvertently awoke multiple threads, or if SDL_SignalAsyncIOQueue() was
 * called to wake up all waiting threads without a finished task.
 *
 * A timeout can be used to specify a maximum wait time, but rather than polling,
 * it is possible to have a timeout of -1 to wait forever, and use
 * SDL_SignalAsyncIOQueue() to wake up the waiting threads later.
 *
 * \param queue the async I/O task queue to wait on.
 * \param outcome details of a finished task will be written here. May not be NULL.
 * \param timeoutMS the maximum time to wait, in milliseconds, or -1 to wait
 *                  indefinitely.
 * \returns true if task has completed, false otherwise.
 *
 * \threadsafety It is safe to call this function from any thread.
 *
 * \since This function is available since SDL 3.0.0.
 *
 * \sa SDL_SignalAsyncIOQueue
 */
extern SDL_DECLSPEC bool SDLCALL SDL_WaitAsyncIOResult(SDL_AsyncIOQueue *queue, SDL_AsyncIOOutcome *outcome, Sint32 timeoutMS);

/**
 * Wake up any threads that are blocking in SDL_WaitAsyncIOResult().
 *
 * This will unblock any threads that are sleeping in a call to
 * SDL_WaitAsyncIOResult for the specified queue, and cause them to
 * return from that function.
 *
 * This can be useful when destroying a queue to make sure nothing is
 * touching it indefinitely. In this case, once this call completes, the
 * caller should take measures to make sure any previously-blocked threads
 * have returned from their wait and will not touch the queue again (perhaps
 * by setting a flag to tell the threads to terminate and then using
 * SDL_WaitThread() to make sure they've done so).
 *
 * \param queue the async I/O task queue to signal.
 *
 * \threadsafety It is safe to call this function from any thread.
 *
 * \since This function is available since SDL 3.0.0.
 *
 * \sa SDL_WaitAsyncIOResult
 */
extern SDL_DECLSPEC void SDLCALL SDL_SignalAsyncIOQueue(SDL_AsyncIOQueue *queue);

/**
 * Load all the data from a file path, asynchronously.
 *
 * This function returns as quickly as possible; it does not wait for the
 * read to complete. On a successful return, this work will continue in the
 * background. If the work begins, even failure is asynchronous: a failing
 * return value from this function only means the work couldn't start at all.
 *
 * The data is allocated with a zero byte at the end (null terminated) for
 * convenience. This extra byte is not included in SDL_AsyncIOOutcome's
 * bytes_transferred value.
 *
 * This function will allocate the buffer to contain the file. It must be
 * deallocated by calling SDL_free() on SDL_AsyncIOOutcome's buffer field
 * after completion.
 *
 * An SDL_AsyncIOQueue must be specified. The newly-created SDL_AsyncIOTask
 * will be added to it when it completes its work.
 *
 * \param file the path to read all available data from.
 * \param queue a queue to add the new SDL_AsyncIO to.
 * \param userdata an app-defined pointer that will be provided with the task results.
 * \returns an async task, to be queried for results later.
 *
 * \since This function is available since SDL 3.0.0.
 *
 * \sa SDL_LoadFile_IO
 */
extern SDL_DECLSPEC SDL_AsyncIOTask * SDLCALL SDL_LoadFileAsync(const char *file, SDL_AsyncIOQueue *queue, void *userdata);

/* Ends C function definitions when using C++ */
#ifdef __cplusplus
}
#endif
#include <SDL3/SDL_close_code.h>

#endif /* SDL_asyncio_h_ */